Hello, 

 There are no ways to "change" the ciphers on PS Storage.  As I mentioned in the other post you can disable the older / weaker ones. 

Here's a link on securing the PS series arrays

http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/BP1076-EQL-security.pdf

You can refer to the EqualLogic command line interface (CLI) guide for the options to disable some features.

How to disable telnet access

grpparams cliaccess-telnet enable|disable

How to disable FTP on an array

grpparams ftp-service enable|disable

How to tighten SSH security on array

grpparams cliaccess-ssh v1-protocol enable|disable

grpparams crypto-legacy-protocols enable|disable

Administrators may also wish to customise the login message to inform users logging into the system.

grpparams session-banner enable "bannerText" | disable

How to configure idle sesssion login timouts

grpparams session-idle-timeout n

 Regards,

Don