UNSOLVED

Selvaggio

updated

11 years ago

S

Selvaggio

6 Posts

0

57055

October 27th, 2015 05:00

Alienware 17R3 Touchpad Auto Disables

The touchpad automatically disables.  Once that happens, it cannot be restored.  The FN+F11 does not work.  The Support Assist fix does not fix the problem.  I have updated the drivers for the touchpad and that also has not fixed the problem.  Any suggestions?

  • Alienware - Rodrigo

    9 Technologist

    4398 Posts

    1060

    0

    Posted October 27th, 2015 15:00

    Hi,

    Can you connect an external mouse to confirm if the same thing happens with the mouse? Is this is an out of the box issue or it was working fine at first?

  • Selvaggio

    6 Posts

    1060

    0

    Posted October 27th, 2015 16:00

    It did not start out of the box.  It has no effect on the mouse.  The mouse works fine.  It seems to have occurred sometime after I attached a wireless mouse.

  • Alienware - Rodrigo

    9 Technologist

    4398 Posts

    1060

    0

    Posted October 29th, 2015 12:00

    Hi,

    Can you try booting to Safe Mode to confirm if the same things happens in Safe Mode?

  • Selvaggio

    6 Posts

    1060

    0

    Posted October 29th, 2015 12:00

    I restarted in safe mode and it works fine.  The fn-11 works and I can plug-in and unplug the usb mouse connector and still use either one.  But when started again regularly, the same problem occurs and the touchpad auto-disables and cannot be restored.

  • Alienware - Rodrigo

    9 Technologist

    4398 Posts

    1060

    0

    Posted November 2nd, 2015 14:00

    Hi, 

    Thanks for confirming this. Did you make sure to delete all of the software that came with your wireless mouse?

  • PsychoEd200

    13 Posts

    1017

    0

    Posted November 6th, 2015 16:00

    i found a fix that works.

    Uninstall Synaptics application in Apps and Features and

    Uninstall synaptics driver from device manager under System Devices not Mice and other pointing devices.

    Once i did that its been working flawlessly for the past 2 days.

  • PsychoEd200

    13 Posts

    1060

    0

    Posted November 9th, 2015 20:00

    if you delete the touchpad software and device driver in system devices. after restart the touchpad works

  • Selvaggio

    6 Posts

    1059

    1

    Posted November 15th, 2015 14:00

    I uninstalled the mouse software and now it works when I remove the usb connector for the mouse.  I doubt this is how it was intended, but at least I can use the touchpad now.  I just cannot access all of the features of the mouse.

  • PsychoEd200

    13 Posts

    1059

    0

    Posted November 15th, 2015 23:00

    I uninstalled the mouse software and now it works when I remove the usb connector for the mouse.  I doubt this is how it was intended, but at least I can use the touchpad now.  I just cannot access all of the features of the mouse.

     

    Glad you got it working. Make sure your system update doesnt re-install software. If it does just uninstall Touchpad application again. *** cant use gestures.

  • JW0914

    105 Posts

    741

    0

    Posted November 20th, 2015 22:00

    There's an option under the mouse hardware settings that you tick to turn off the TP if a usb mouse is connected, and most likely, you have it ticked.

    In regards to the uninstallation of Synaptics Drivers that made the TP work again... this would only occur when you install the improper version of Synaptics drivers for your device.  With Alienware, and I'm not sure why, you cannot utilize drivers downloaded from Synaptic and must utilize drivers from your downloads and support page only. 

    • The only drivers you can't download directly from the manufacturer are TP drivers, HDD shock sensor drivers, and Chipset/IMEI drivers [exception being card reader chipset).