Announcement Banner
UNSOLVED

Loyalblue

updated

14 years ago

L

Loyalblue

2 Posts

0

11459

February 27th, 2013 20:00

M5030 Black Screen Blinking Cursor

Hello,

I have a dell M5030.  When I power it up I see the dell logo with F2/F12 options. I can get into both of those, after that screen disappears it goes to a black screen with a blinking cursor in the upper left hand corner.  I have tried various "fixes" that i can find online, from powering it down hitting f12 to try and boot from hard drive, nothing seems to work.  I have ran the diagnostics fully and no errors come up, but I can not seem to get it to do anything.  F8 does not work for me to try to go to safe mode.  I am at my last nerve with this and am out of ideas/options Please help!

Thanks!

  • Senthil S

    6 Operator

    •

    2547 Posts

    449

    0

    Posted February 27th, 2013 23:00

    Hi Loyalblue,

    Please run the custom test on hard drive to check the hard drive is working as designed. Please follow the steps below.

    Turn the computer off >restart the computer

    As the computer boots, press when the Dell Screen appears

    When the Boot menu appears, highlight the Boot to Utility Partition option, first system will run the PSA hardware diagnostics and then it will give you a message to continue or exit, please click on exit and then select test system and custom test.

     Press the key to highlight Test System Press to continue to 32-bit Diagnostics.

    Run the custom test on hard drive and check if there is any error listed. You can also refer the link below to run the diagnostics.

    http://dell.to/mLUUiF

    Also send me the system service tag in a private chat. Click on my username select start conversation and send me the details.

    Please do reply for further assistance.


    Retired

  • Loyalblue

    2 Posts

    449

    0

    Posted February 28th, 2013 19:00

    Ok when I start up I have to use a separate keyboard to be able to get into F12 for some reason it wont work on the laptop.  The boot sequence you said to choose is not listed, I have Boot from Hard Drive, CD/DVD, Diagnostics, and setup.

    So i Go to diagnostics, and run that first error I get and I assume its because i'm using a separate keyboard is

    Error Code 0411

    Msg: Error Code 2000-0411

    Msg: Cable - Keyboard not detected

    The Computer then keeps going though its Pre-Boot assessment  and everything passes

    Then I get "Do you want to run the remaining memory tests?

    I do that and everything is fine

    Then it goes to Booting Diagnostic Utility Partition

    Then I get

    Test Memory

    Test System

    Exit

    So I do Test System

    only "error" that came up was No mouse detected

  • Senthil S

    6 Operator

    •

    2547 Posts

    449

    0

    Posted February 28th, 2013 23:00

    Hi Loyalblue,

    The Error Code 2000-0411 indicates keyboard not detected, please try reseating the keyboard using the manual from the link below.

    http://bit.ly/QGQJvw

    Also you can reseat the hard drive. Hard drive is a Field replacement unit but if you’re comfortable please reseat it using the manual.

    In case after doing the above steps if still the problem persists, you may have to reinstall the operating system and could lead to data loss.


    Retired