UNSOLVED

bILLaIR

updated

21 years ago

Closed

B

bILLaIR

2 Posts

0

6639

July 27th, 2005 13:00

Run away Cursor

Inspiron 8600 running WIN XP Home with about 80 Hours run time since new and using a Logitech Scroll Mouse connected to the USB port.

When the system is started it appears to be operating O.K. but then The Cursor slowly drifts to the upper right hand corner of the screen and disappears off the screen. I can drag the cursor back to the center of the screen with the mouse, but as soon as I stop moving the mouse, the cursor drifts back to the upper right corner of the screen and disappears off the screen.

Disconnecting the mouse does not help. Using the nub can bring it back, but it disappears as soon as the nub is released. With the Mouse disconnected The touch pad will not work at all once the cursor has gone off the screen.

Disabling the touch pad in BIOS and reconnecting the mouse does not help.

Thanks for any Help
  • snapohead

    1230 Posts

    423

    0

    Posted July 28th, 2005 02:00

    Try physically disconnecting the touchpad connector from the motherboard.
  • bILLaIR

    2 Posts

    423

    0

    Posted July 28th, 2005 19:00

    May be solution:

    My son-in-law Uninstalled the logitech scroll mouse
    Downloaded and installed ALPS (A09)
    Went to propeties of mouse and disabled the nub pointer

    Tjis appears to have solved the solution.

    Time will tell.

    Thanks for the help.

    Bill
  • snapohead

    1230 Posts

    423

    0

    Posted July 31st, 2005 23:00

    I've found that disabling the touchstick or touchpad through the mouse settings doesn't always work. But it looks as though its working for you.

    Good luck!

  • Cabo Tombo

    1 Message

    423

    0

    Posted August 30th, 2005 16:00

    I have a latitude with this same problem, it will go for days and be ok then bam, I can't control the cursor.  It's like trying to reel in a 50 lb fish!  If I open a new window sometimes it will behave ok for a while, then start "running" again.  Can I replace the touch pad or do I need a whole new keyboard?  thanks