I recently just bought a LCD monitor from Dell S2409W which according to the specs sheet supports Full HD. I tried attaching it to my HIS Iceq4 Turbo HD4850 using a HDMI cable(via DVI-HDMI connectot) and i can't seem to get the display to work properly.Below are a few problems that i faced


1) screen detected signal from the HDMI connection and then the monitor displays this message
" The current Input timing is not supported by the monitor display. Please change your input timing to 1920x1080@60hz or any other monitor listed timing as per the monitor specification "

2) I manage to get a display on lower reso(around 13xx iirc) but when i increase the reso again, it'll appear the message above (1)



Got really frustrated with it. Does anyone have any clues or suggestions i can work on ?Things i already did/tried

1)Updated my GPU driver and Catalyst
2)Setting up using the Force button in Catalyst to put it to 1080p
3)Reboot computer after attaching the monitor to the pc using the HDMI cable.


I'm really out of ideas.

Thanks for viewing and trying to help