Hi @sk_kavala

You need to add the clients into a snapshot based group, so please open group configuration, and select the box "Snapshot backup", and then set the pool you want to use.

Thank you,

Carlos

Hello,

I sent you the step-by-step already on how to configure the group.

"so please open group configuration, and select the box "Snapshot backup", and then set the pool you want to use"

Also it's a bit confusing, as you said there is no cluster, but you mention 5 nodes; can you please clarify?

Thank you,

Carlos

Hello carlos,

how would i configure that

it must and should need for Hyper -v configuration

by the way there is no cluster environment

we have individual nodes in hyper v 1 server and 'hyper v 2 server parallel

in each hyper v there are approximately 5 nodes.

hello carlos,

i deleted my old clients and again i have created clients with new group as you said

but now it is giving below error

Cannot run savefs: The requested operation requires elevation. (Win32 error 0x2e4)

HYPSRV01:savefs: retried 1 times

Hello Carlos,

following error i'm getting after UAC has been disabled on all nodes of hyper v and rebooted.

*****************************************************************************************************************************

APPLICATIONS:\Microsoft Hyper-V: Backup of [APPLICATIONS:\Microsoft Hyper-V] failed

rv09.hastinapur.res].

64038:nsrsnap_vss_save:NMM .. Error creating NetWorker backup of snapshot: NMM .. Operation unit failed with error Backup failed while creating coversave. Unable to grant CLIENT license to client 'HYPSRV02': Too many clients for license type 0 Windows NT Server on Intel.  Maximum is 20

. Please make sure you have configured at least one NetWorker Device and client resources are configured for the application host [HYPSRV02.hastinapur.res] and the Mount Host [hypsrv02.hastinapur.res] on NetWorker Server [inetbcksrv09.hastinapur.res].

63372:nsrsnap_vss_save:NMM .. Registration of snapshot set failed -- NMM .. Operation unit failed with error Backup failed while creating coversave. Unable to grant CLIENT license to client 'HYPSRV02': Too many clients for license type 0 Windows NT Server on Intel.  Maximum is 20

. Please make sure you have configured at least one NetWorker Device and client resources are configured for the application host [HYPSRV02.hastinapur.res] and the Mount Host [hypsrv02.hastinapur.res] on NetWorker Server [inetbcksrv09.hastinapur.res]

77175:nsrsnap_vss_save:NMM ..  completed commit replica with status of false.

Microsoft DiskPart version 6.3.9600

Copyright (C) 1999-2013 Microsoft Corporation.

On computer: HYPSRV02

Automatic mounting of new volumes enabled.

37959:nsrsnap_vss_save:An internal error occurred.

.

63335:nsrsnap_vss_save:NMM backup failed to complete successfully.

102333 1430308949 3 0 0 5272 5268 0 hypsrv02.hastinapur.res nsrsnap_vss_save NSR error 21 Exiting with failure. 0

Can you please check your liceneses?:

Unable to grant CLIENT license to client 'HYPSRV02': Too many clients for license type 0 Windows NT Server on Intel.  Maximum is 20

Also make sure the pool is correctly configured.

In any case, I think you have now fallen into a duplicated client ID issue.

I'll send you the procedure later on. If doesn't work then you will need to engage support to clean your media DB

Thank you,

Carlos

hello carlos,

Thanks for your indeed support,

kindly send me the procedure besides how can i examine that whether pool has been correctly configured or not.

what is it meant by

Unable to grant CLIENT license to client 'HYPSRV02': Too many clients for license type 0 Windows NT Server on Intel.  Maximum is 20

I'm afraid this indicates a duplicated client Id issue.

Please contact support and mention the Hyper-V along with the duplicated ID issues.

You can even share the link of this thread when opening the case.

Thank you,

Carlos

@Carlos can you please have a look at my thread which is belongs to exchange 2013 backup with NMM 8.2.1 is giving some error, i think it may belongs to snapshot policy  could you please guide me in regards that.

************************error below mentioned****************************************************

42960:nsrsnap:Add APPLICATIONS:\Microsoft Exchange 2013 12345678 1

92347:nsrsnap:***************** Snapshot Management operation has started, logging to "C:\Program Files\EMC NetWorker\nsr\logs\nwsnap.raw" *****************05/14/15 18:40:16.926253 [nsr/save/nsrsnap.c 611] Calling nsrrm_host

05/14/15 18:40:16.957503 [nsr/save/nsrsnap.c 886] Calling get_pool_name..

52051:nsrsnap:Printing savecmd=nsrsnap_vss_save after parsing

05/14/15 18:40:17.082502 [nsr/save/nsrsnap.c 1693] Calling snap_wait..

05/14/15 18:40:37.129679 [nsr/save/nsrsnap.c 1714] Calling parse_fs_logs_and_prefix..

107092:nsrsnap_vss_save:Version information for C:\Program Files\EMC NetWorker\nsr\bin\nsrsnap_vss_save.exe: Original file name: nsrsnap_vss_save.exe Version: 8.2.1.0.681 Comments: Supporting Microsoft Volume Shadow Copy Service

102357:nsrsnap_vss_save:Unknown Application Information parameter: NSR_SAVE_FROM_SAVEGRP_NSRSNAP, may not be supported

102357:nsrsnap_vss_save:Unknown Application Information parameter: NSR_SAVE_FROM_SAVEGRP_NSRSNAP, may not be supported

102345:nsrsnap_vss_save:Data mover host name not specified. Assuming local host: rci-has-mbx02.hastinapur.res

102338:nsrsnap_vss_save:Backup is level FULL. Set GLR compatibility to YES.

80276:nsrsnap_vss_save:NMM .. Error: Local retention of snapshots is not allowed unless the Exchange application information variable NSR_EXCH_RETAIN_SNAPSHOTS is present and contains the value "yes". Group: "DAILY_MAILBOX" Snapshot Policy: "exchange" Snapshots Per Day: "1" Retain: "1" Backup Snapshots: "All" Level: "full".

80253:nsrsnap_vss_save:NMM.. Unable to continue backup.  "APPLICATIONS:\Microsoft Exchange 2013" snapshot policy requirements are not met.

Internal error.

102333 1431609036 3 0 0 13528 11508 0 rci-has-mbx02.hastinapur.res nsrsnap_vss_save NSR error 21 Exiting with failure. 0

APPLICATIONS:\Microsoft Exchange 2013: Backup of [APPLICATIONS:\Microsoft Exchange 2013] failed

Regards,

SK_KAVALA