UNSOLVED
using jbedit
Hi,
In my setup, I have shared my s24 library and map it to the other storage nodes. I had configure it through jbconfig. I just want to add one more server to that and I used jbedit command . but it gives some error for that which is as below-
C:\>jbedit -a -f INDELHMEYIN22.mea.ey.net:\\.\Tape0 -E 256 -v -s indelhmeysql04.
mea.ey.net -j adic@3.2.1
setting verbosity level to `1'
jbedit: Changing device name from INDELHMEYIN22.mea.ey.net:\\.\Tape0 to rd=INDELHMEYIN22.mea.ey.net:\\.\Tape0.
jbedit: RAP error: Could not find any storage nodes in the RAP database!
Pls. help me out..
In my setup, I have shared my s24 library and map it to the other storage nodes. I had configure it through jbconfig. I just want to add one more server to that and I used jbedit command . but it gives some error for that which is as below-
C:\>jbedit -a -f INDELHMEYIN22.mea.ey.net:\\.\Tape0 -E 256 -v -s indelhmeysql04.
mea.ey.net -j adic@3.2.1
setting verbosity level to `1'
jbedit: Changing device name from INDELHMEYIN22.mea.ey.net:\\.\Tape0 to rd=INDELHMEYIN22.mea.ey.net:\\.\Tape0.
jbedit: RAP error: Could not find any storage nodes in the RAP database!
Pls. help me out..
- Now I am getting the following error with the other server -
C:\>jbedit -a -f INDELHMEYIN24.mea.ey.net -E 256 -v -s 10.212.20.43 -j adic@3.2.
1
setting verbosity level to `1'
jbedit: RAP error: Cannot find device `INDELHMEYIN24.mea.ey.net' in 'unconfig de
vice names' resource. xvan_egmond
74 Posts
640
0
Posted December 16th, 2006 01:00
When using NW73+ jbedit checks the new resource NSR storage node. If the drive to be configured is not there as an unconfigured device it will not work.
Please go to devices-storage nodes, there right-click on the newly created storagenode and select scan for devices.
In the logging page you shoud now see the new tape unit appear.
Please use
jbedit -af-E -j jukebox
to add the new drive.
ble1
6 Operator
•
14354 Posts
•
56186 Points
640
0
Posted November 28th, 2006 06:00