I am using byte Corseca bluetooth headset for more than one year. Last 2 months back i got an issue in charging the headset. When i connect the headset to power source (USB Charging) usually i will show the red light glowing constantly. But now it starts blink with in 2-5 sec after i connect it to the power source.
I am looking for the solution and the service center or any source of help for this but i failed.
Sorry you're having problems with those headphones. When you say that you're connecting them to a USB charging power source, does that mean you're plugging the USB cable into your computer? Or is that USB cable connected to a power outlet?
You also said it's been happening for 2 months. Are the headphones still charging, and if so, are you able to use the headphones?
I would recommend trying a couple different things. First, if you're plugging those headphones into a computer to charge, try plugging the USB (with adapter) into a wall outlet to see if that affects the charging ability.
Unfortunately, from what I can see those headphones are pretty much considered "plug and play". I could not find any documentation on troubleshooting that particular make and model. I'll keep looking and ask around to see if anyone else has any suggestions that we can try.
I purchased this head set 3 months back. I am also having the samngproblem of charging. The set doesnt get charged while connected to home power socket. Red LED doesn't glow. Is there any service centre in Ahmedabad? Can so.eone help me?
I had the same problem.I got it repaired from Damsons technologies ,A-33,Block A, Industrial area,Wazirpur, New drlhi. They took just 10 min to repair. PCB changed for Rs 300. U can send ur headphone by courier also. Team is very very helpful. Contact Mr Rajmishore on 09212310879
Contact Mr Rajkishore on . Service centre for corseca at delhi. They accept items by courier also.fantastic experience and a helpful team .best so far ever experienced
My corseca byte headphones are not turning on and on charging the redlight is blinking and when I press the multifunction button the red light just stop for few min and then again starts blinking
I have tried almost everything that I can do but still the headphones not charging .can you tell me a solution to this problem
DELL-Todd S
4 Apprentice
•
1837 Posts
6122
0
Posted April 27th, 2015 11:00
Hi,
Sorry you're having problems with those headphones. When you say that you're connecting them to a USB charging power source, does that mean you're plugging the USB cable into your computer? Or is that USB cable connected to a power outlet?
You also said it's been happening for 2 months. Are the headphones still charging, and if so, are you able to use the headphones?
I would recommend trying a couple different things. First, if you're plugging those headphones into a computer to charge, try plugging the USB (with adapter) into a wall outlet to see if that affects the charging ability.
Next, I would recommend removing those bluetooth headphones from Windows, then try to pair them up again and see if that helps at all.
Unfortunately, from what I can see those headphones are pretty much considered "plug and play". I could not find any documentation on troubleshooting that particular make and model. I'll keep looking and ask around to see if anyone else has any suggestions that we can try.
Todd