Solved!
Go to SolutionAS
Abd saggaf
9 Posts
0
5715
September 7th, 2021 02:00
UBUNTU TO WINDOWS 10 INSTALLATION
dear fellas,
I m using optiplex desktop 3070 which has its default ubuntu os . i need to change to win 10 i tried in the setup it shows no device driver found.
1. i downloaded all the driver from the official page and put it on usb stick show the path it didnt took it
2. i switch difffertent usb ports also.
3. i tried enabling secure boots on/off
4. tried different kinds of os and also updated the bios also.
!
please help me out
1874
0
Posted September 7th, 2021 03:00
i have 1tb HDD, SATA only, secure boot is enabled, sata operation is in AHCI. internet port was not connected.but i connected now. still the same
1877
0
Posted September 7th, 2021 03:00
Do You have an SSD in the PC?
M.2 or Sata?
Do You have Secure Boot on?
Under System Configuration and SATA Operation do You have AHCI selected?
1869
0
Posted September 7th, 2021 03:00
Can You please make screenshot of the driver error message (cell phone photo would be suffice) and post it here?
1879
0
Posted September 7th, 2021 03:00
Have You downloaded Windows 10 from Microsoft and made a bootable USB drive?
Have You tried installing Windows 10 by pressing F12, selecting the USB stick and booting from it?
We need more info.
1309
1
Posted September 7th, 2021 03:00
I forgot to ask, if the PC is connected to the Internet? It should be. Drivers will be downloaded online.
1878
0
Posted September 7th, 2021 03:00
hi,
yes i downloaded from media creation tool from microsoft and made it to bootable ,by pressing f12 it reaches the setup but after that driver issues are showing.
1860
0
Posted September 7th, 2021 03:00
yess i have erased by diskpart commads from the setup cmd
1867
0
Posted September 7th, 2021 03:00
One other thing.
When installing, did You erase the linux partition(s) with the Windows installer before installing Windows?
1089
1
Posted September 7th, 2021 04:00
I don't see the photo yet, I'll have to wait until the Moderators release it for viewing.
Please have a little patience until I can see and respond.
Philip_Yip
11 Legend
•
16052 Posts
•
65915 Points
2695
0
Posted September 9th, 2021 23:00
That error message is usually when the Windows installation media, particularly the install.wim is corrupted...
It is hard to make the installation media on Linux due to the direct download link having an install.wim which exceeds 4.0 GB and limited Linux support for the NTFS. In essence the install.wim gets truncated.
You can however make a FAT32 formatted USB flash drive and split the install.wim into <4.0 GB install.swm files however it requires a number of steps. I document it in detail here:
https://dellwindowsreinstallationguide.com/downloading-and-creating-a-windows-10-bootable-usb-on-linux-ubuntu/
https://www.youtube.com/watch?v=83g-0azk_R8
Windows 11 Installation Guide
Windows 7 Installation Guide