UNSOLVED
Cannot get into Web/Remote Management Site (Password Reset)
We have a Dell Power Vault 124T and have a Tape Jammed Type (BF) error message on the LCD. I am trying to get into the RMU which I can navigate to, but need admin username and password. I have tried all the conventional ones we use at our place of business with no success. I have also tried using admin/password admin/admin and a whole bunch of other default Dell passwords with no success. How can I reset this password?
2422
0
Posted January 16th, 2019 08:00
Hello Lbk81,
If you select configuration tab does it bring up any options or does it ask you to login? If it asks you to login, that is where you will find the **12345**.
Please let us know if you have any other questions.
2399
0
Posted January 16th, 2019 13:00
Hello Lbk81,
What you can try to do is to try & manually move the media out the drive to any empty slot. If that doesn’t work, then you can try to upgrade the firmware on the tape drive. What this will do is rewind the media & should force the media out of the drive. If that doesn’t work either, then you will need to remove the drive from the chassis & manually remove the media.
Please let us know if you have any other questions.
2380
0
Posted January 17th, 2019 06:00
Hello Lbk81,
You can move media via the RMU. If you select the Library Operations page you will see a picture of the PV124T. You can select the tape in the drive & try to move it to any slot that is empty. If the slot is green, then there is a tape in the slot. If the slot is tan, then it is cleaning media. Here is the link to the user’s guide for your PV124T as well. https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-124t_user%27s%20guide11_en-us.pdf
Please let us know if you have any other questions.
879
0
Posted January 17th, 2019 10:00
Hello Lbk81,
Looking at the picture that you posted, you first need to move the media in the mailslot to any empty slot. Once that is done then see if you can move the media out of the drive or see if you still get the BF error code. If you are still getting the BF error, then you will need to make sure that there is no media in the picker. I am pretty sure that once you move the media out of the mailslot, that you should be able to move the media out of the drive.
Please let us know if you have any other questions.
837
0
Posted January 21st, 2019 13:00
Hello Lbk81,
The only other thing that you can try is to remove the sas cable from yout PV124T & see if the media will come out. If it still won’t then the only way to remove the media is to remove the drive, and manually remove the media from the drive.
Please let us know if you have any other questions.
2423
0
Posted January 16th, 2019 08:00
Sam,
Attached is what I see when I try to login..There are no **
2425
0
Posted January 16th, 2019 08:00
Sam,
Pardon my ignorance, but would this be on the RMU, or the physical unit itself? I do not see anything above the username inside a set of ** when I try to login to the PV124T. Attached
is what I see.. 2411
0
Posted January 16th, 2019 09:00
Sam,
Ty for your help with this. I sent you a private message with what I see/get.
2401
0
Posted January 16th, 2019 13:00
Sam,
Ty for your help. Now that I am able to login as an admin into the Remote console/RMU.. is there a method within here I can go through to remove the jam on the tape?
DELL-Sam L
Community Manager
•
8058 Posts
•
34386 Points
2427
0
Posted January 16th, 2019 08:00
Hello Lbk81,
When you try to login to your PV124T above the username there should be 5 numbers inside a set of ** like the following example**12345**. I will send you a private message and if you can provide me with that number, & I can provide you with a temporary so that you can get access and change the administrator password.
Please let us know if you have any other questions.