UNSOLVED

Jimmers

updated

21 years ago

J

Jimmers

3 Posts

0

7207

August 1st, 2005 16:00

Dell 962 Fax problems...Need Help!

:mansad: I contacted Dell Tech and explained my problem...They want to send me another printer but after reading all the post concerning the AIO962, I think it's not going to help the problem.
 
Problem: I want to leave my printer on to detect an incoming Fax or a voice call.
I 1st tried to open my AIO962 printer set-up utility and clicked on "Detect Fax Calls" and saved the new settings. It will not save and returns to Auto answer after 1 ring or manual. whichever it sets it's mind to do at the time.
I then set my answering machine to 2 rings and my fax to 5 rings. ( I understand this works)....well now I have my answering machine set for 4 rings and my AIO962 set for 5 rings. It still does not work.
I also uninstalled the printer software and re-installed twice.
Any ideas.
I'm happy will my Dell computer but Dell should not put out a product untill they get the bugs out of it. It's called QC!!!
I need ideas on how I can get my fax to detect an incoming call before my answering machine picks up.
  • Printboy007

    569 Posts

    195

    0

    Posted August 1st, 2005 19:00

    Your problem is due to a software bug in the Printer Setup Utility that you are using to change your 962 fax settings.  This issue has been covered in depth in this thread.  Happy reading!
     
     
    Come back if you have any additional questions...
  • Jimmers

    3 Posts

    195

    0

    Posted August 1st, 2005 20:00

    I did read that post before. Thank you very much. I'm staying away from the PSU.
    As stated before, I set the 962 to 5 rings and my answering machine to 4 rings.
    ( also tried 5 and 2 ).Nothing helps.

    Also tried to Fax 9 pages and the party only gets blank pages with my header. Yes...I loaded them face up as instructed.
    Any other ideas?

    Thank you,
    Jimmers  :smileysad:

  • Printboy007

    569 Posts

    195

    0

    Posted August 2nd, 2005 14:00

    Are you sure that the 'Auto Answer' button is enabled (light should be lit green) on the front Op Panel of the 962?
  • Jimmers

    3 Posts

    195

    0

    Posted August 2nd, 2005 15:00

    RE: Are you sure that the 'Auto Answer' button is enabled (light should be lit green) on the front Op Panel of the 962?
     
    Yes it's on.  I lowered my connection speed and now I can send and receive faxes manually. I still can't get it to detect an incoming Fax from a Voice Call. After my answering machine leaves a greeting, it will not allow the Fax to receive. Everything shuts down.
    I can receive a Fax if I have the "Auto Answer" button on and the Fax set less then my answering machine (4 rings).
     

    Message Edited by Jimmers on 08-02-2005 11:55 AM

    Message Edited by Jimmers on 08-02-2005 11:56 AM

  • 195

    0

    Posted August 26th, 2005 17:00

    We have a all in one 962.  On Wednesday night we had massive storms here and now I can't send or receive faxes.  I have called Dell and been on hold for over 30 minutes 3 separate times and no one ever came on.  We are running a business and must have access to  a fax.  HELP!!  the error reports say that there is no dial tone.  I have had the phone company check the lines, I have changed the cord from the wall jack to the fax machine.  When trying to receive a fax, the machine never picks up.  It should answer after one ring.  I would appreciate any help anyone can offer!!
  • jtw3262

    1 Message

    195

    0

    Posted September 1st, 2005 15:00

    I have same problem - and I am still looking for a solution.