UNSOLVED
Dell R340 ipmitool dcmi power reading error read
Good day. There is a park of servers based on R340 and R540. there was a need to read the power consumption parameters through ipmitool
Dell R340 ipmi access enable:
| BIOS Version | 2.3.5 |
[napaster@dellpaster ~]$ ipmitool dcmi power reading -I lanplus -H 10.100.25.253 -U root -L user -P password
DCMI request failed because: Command not supported in present state (d5)
or delloem use
[napaster@dellpaster ~]$ ipmitool delloem powermonitor getpowerbudget -I lanplus -H 10.100.25.253 -U root -P password
Error getting power cap: Command not supported in present state
Dell R540 ipmi access enable
| BIOS Version | 2.8.2 |
[napaster@dellpaster ~]$ ipmitool dcmi power reading -I lanplus -H 10.100.25.252 -U root -L user -P password
Instantaneous power reading: 211 Watts
Minimum during sampling period: 1 Watts
Maximum during sampling period: 334 Watts
Average power reading over sample period: 214 Watts
IPMI timestamp: Wed Jan 19 13:08:54 2022
Sampling period: 00000001 Seconds.
Power reading state is: activated
[napaster@dellpaster ~]$
[napaster@dellpaster ~]$ ipmitool delloem powermonitor getpowerbudget -I lanplus -H 10.100.25.252 -U root -L user -P password
Maximum power: 493 Watt
Minimum power: 337 Watt
Power cap : 109 Watt
[napaster@dellpaster ~]$
DELL-Shine K
6 Operator
•
3042 Posts
1275
0
Posted January 19th, 2022 06:00
What power supply are you having on R340? Is it a cabled PSU or Redundant PSU? Power monitoring only supported on redundant PSU configuration. Can you also check whether iDRAC is showing power monitoring information for R340.
napaster
2 Posts
1273
0
Posted January 19th, 2022 06:00
Installed 2 power supplies with cables.
And why in the R540 nothing needs to be turned on, and everything shows, but in the R340 something needs to be done?
Do I understand correctly that this is what we are talking about?