Hi,

RP4VM does support bandwidth limitation which can be configured via the config_link_policy CLI command.

Regards,

Idan Kentor

RecoverPoint Corporate Systems Engineering

idan.kentor@emc.com

Yes it does from the CLI as you mentioned. Same rules apply.

Regards,

Rich Forshaw

Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)

Data Protection and Availability Solutions

EMC Europe Limited

Mobile: 44 (0) 7730 781169 44%20(0)%207730%20781169>

E-mail: richard.forshaw@emc.com

Twitter: @rw4shaw

Hi,

can I limit bandwidth globaly for all the system and not per CG?

Not currently, you have the option to prioritize CGs and limit bandwidth on a per CG basis as well.

Regards,

Idan

Idan Kentor

RecoverPoint Corporate Systems Engineering

Twitter: @IdanKentor

Idan, is this limited by default? I have an installation that is only pushing 20mbps on a gig link. 

Hi,

Thanks for your question.  It should not have a limit by default. https://dell.to/3kbX463

Let us know if there is anything else we can help you with.

Hi,

I am trying to replicate the VM from DC to DR from last 1 month, but it's taking too much time to sync.

so here I just want to know, is there any possibility to strict the bandwidth for CGs, like I have total 8 CGs & 7 CGs in Active mode & 1 CGs in initialization & I want 75% of the bandwidth dedicated to 1 CGs, which is in initialization mode.

For Example: - I have 100 Mbps dedicated bandwidth for VM Replication.

Looking Forward to here with positive response.

Thanks in advance.

Best Regards,

Abdul Quddus

Hi,

Thanks for your question.

Yes, you can limit the bandwidth per CG. https://dell.to/42XkQ8w

Let us know if you have any additional questions.