Solved!
Go to Solution827
0
Posted November 14th, 2007 06:00
yusa,
Are the devices offline? They need to be to be clipped or DSF'd.
Have the Symm devices ever been online then off?
Michael827
1
Posted November 14th, 2007 07:00
yusa,
Sorry for the hijack of thread.
I know that it is at the end of the work day for your area.
Hope that you were able to initialize or clip the new volumes.
Another thing that came to mind, if you are doing a clip to existing volumes that they also need to be offline but not configured offline. Still need the paths to the devices.
Michael827
0
Posted November 14th, 2007 07:00
c'mon brother .. gimme your phone number so I can call you and ask you to jump in when things get really hot, like with this topic !!827
0
Posted November 14th, 2007 07:00
Stefano,
I sent you an email. Talk to you soon or on email.
Michael829
0
Posted November 14th, 2007 12:00
thank you ,could you able to write to me command with which i ll able to put device in offline from inline829
0
Posted November 15th, 2007 10:00
yusa,
From the Mainframe you want to first check the device status:
d u,,,xxxx,1 - displays the unit status of one device.
d u,,,xxxx,8 - displays the unit status of 8 devices.
From the Mainframe you also want to check to see if there is a job running or allocated to it:
d u,,alloc,xxxx,1 - displays the allocation to that deivce any job.
From the Mainframe to vary off a device:
v xxxx,offline - takes the device (only) offline, no change to the paths.
From the Mainframe to vary on the device:
v xxxx,online - brings the device online.
Michael829
0
Posted November 15th, 2007 11:00
Hi,
I don t have any mainframe connection ! with Sym 5 ( 8430).
I will connect only :Solaris server to 8430.
I want to explain my problem a little bit ,I think it 'll be more usefull ... I build a new "bin" file for the new configuration that I did on a symmetrix ... and after that I uploaded "bin" file ....and during the next step I faced to choose for the format that I have to done. I choose a option "No speacial Format " that mean that I will use for open systems connection and after recieved that error message.
YuSa829
0
Posted November 15th, 2007 12:00
YuSa,
Sorry, I was assuming that from the way you asked your first question that you were doing an init of the devices from Mainframe.
So do you do your own maintenance and changes via bin files?
Is this a new Symmetrix and initial install?
Just trying to get a feel where you are in the process and how we can help.
Michael829
0
Posted November 15th, 2007 12:00
YuSa,
Opps, wanted to add first but already entered.
Depending on the changes in devices and protection, there are requirements to do the Symmetrix VTOC, etc.
Michael
mlee2
108 Posts
1049
0
Posted November 15th, 2007 17:00
Can you please confirm the Symmetrix microcode level and which Service Processor / SymmWin "script" you are using?
The Service Processor / SymmWin scripts are intended only for use by EMC certified Customer Service Engineers.
Your friendly local EMC Service Representative would be able to confirm the correct state of your Symmetrix before attempting to execute any SymmWin scripts.
However, from your last note it sounds like you are using the SymmWin Procedures > Procedure Wizard > Code Load procedures > Configure and Install New Symmetrix script?
If this is so then the entire Symmetrix needs to be set OFFLINE.
Similarly if you are using the Procedures > Procedure Wizard > Disk Utilities > Vtoc ALL Drives script again the Symmetrix disk directors need to be OFFLINE.
Best Regards,
Michael.