UNSOLVED
S
Srinath8055
5 Posts
1
1106
November 17th, 2014 13:00
Unable to add RAID Groups while creating virtual block pool
I am working to integrate Hitachi USPV (RAID Groups/No Pool) to VIPR. I could successfully add the storage system and create virtual array but unable to fine the RAID groups while creating block pool. Can you please let me know if I am missing something.
369
0
Posted November 17th, 2014 14:00
The ViPR Support matrix shows HiCommand 7.4.1, 7.6.1, and 8.0 are supported. 7.5 might work but it’s also possible that it doesn’t work correctly for ViPR. Is it possible to try 7.6.1?
645
0
Posted November 17th, 2014 14:00
And yes, I selected thick. I dont have Pool License on USPV, so I wanted to use RAID groups to create block pool on VIPR.
645
0
Posted November 17th, 2014 14:00
Can you identify the full version of the ViPR Controller software? Also, the full version of HiCommand and the full model# of the USPV?
In the vPool configuration, did you specify "Thick"?
645
0
Posted November 18th, 2014 07:00
Hi Ganga,
I am able to see pools under storage system in VIPR. But when I could not see them when trying to create a block pool.
645
0
Posted November 19th, 2014 02:00
test
645
0
Posted November 19th, 2014 08:00
Hi,
Please find the attached log.
Do we need to add fabric before we create block pool? I haven't added FC fabric yet.
Regards,
Srinath.
399
0
Posted November 19th, 2014 09:00
Yes, you need to have a fabric with the storage array front end ports assigned before you will be able to build a vPool.
Srinath8055
5 Posts
645
0
Posted November 17th, 2014 14:00
Hi,
It is a trial version of VIPR with just one controller.
VIPR: vipr-2.1.0.1.437
Hitachi Comman Suite: 7.5.0-02
Hitachi USPV: Microcode 60-08-45-00/00