UNSOLVED
A
angel_isakov
1 Rookie
•
100 Posts
0
1224
January 31st, 2014 04:00
MV/Cluster Enabler with VNX question
Hello,
Can i install MV/Cluster Enabler on one node and then add second node?
Thank you
EdwinVanMierlo
39 Posts
785
0
Posted January 31st, 2014 05:00
Hi,
You should not [install one node and add one later]
It is not the way MV/CE should be installed, it can lead to inconsistencies in the setup.You should follow the install instructions as detailed in the "MirrorView Cluster Enabler Plug In Product Guide": https://support.emc.com/docu31012_MirrorView-Cluster-Enabler-Plug-in-Product-Guide-4.1.3.pdf?language=en_US
Also, make sure you read the Release notes: https://support.emc.com/docu19801_MirrorView-Cluster-Enabler-Plug-in-Release-Notes-4.1.3.pdf?language=en_US
and make sure you are familiar with the Best Practices for MV/CE: https://support.emc.com/kb/88425
HTH,
Edwin.If this answer was useful, please "Mark as Answer" and "Like"
angel_isakov
1 Rookie
•
100 Posts
785
1
Posted January 31st, 2014 05:00
Thank you.