Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
A
Aswinkumar_bafd83
46 Posts
0
753
August 5th, 2013 05:00
VNX 5300 basic Configuration
Hi
we installed new VNX 5300 in my environment.
it has 2 DAEs
| B0E0 | Disk 1 | Disk 2 | Disk 3 | Disk 4 | Disk 5 | Disk 6 | Disk 7 | Disk 8 | Disk 9 | Disk 10 | Disk 11 | Disk 12 | Disk 13 | Disk 14 | Disk 15 |
| Size(GB) | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 |
| Type of disk | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS | SAS |
| B0E1 | Disk 1 | Disk 2 | Disk 3 | Disk 4 | Disk 5 | Disk 6 | Disk 7 | Disk 8 | Disk 9 | Disk 10 | Disk 11 | Disk 12 | Disk 13 | Disk 14 | Disk 15 |
| Size(GB) | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB | 2TB |
| Type of disk | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS | NL-SAS |
I want to use this array as Fileserver (present NS-480) and SAN.
Please give me the best recomendation(EMC) for RAID group/storgae pool confgurations.
how to configure the array(CE alredy installed enablers) and how to migrate the entire file systems and VDMs from celerra(NS-480).
Aswinkumar_bafd83
46 Posts
279
0
Posted August 7th, 2013 02:00
Thanks a lot for the reply.
Roger_Wu
6 Operator
•
4025 Posts
279
1
Posted August 7th, 2013 00:00
For the EMC recommendation for RAID group and Pool configuration, you can refer to the whitepaper "EMC VNX Unified Best Practices for Performance":
http://www.emc.com/collateral/software/white-papers/h10938-vnx-best-practices-wp.pdf
To configure the VNX array, you can generate the step-by-step instructions guides on https://mydocs.emc.com/VNX/requestMyDoc.jsp
To migrate the file system from Celera to VNX, you can find the document "Using VNX Replicator" from https://mydocs.emc.com/VNX/relatedDocs.jsp