UNSOLVED
E
echolaughmk
2 Intern
•
522 Posts
0
1784
June 27th, 2017 11:00
VxRAIL Hostname Iteration Question
Hello, The VxRAIL spreadsheet seems to force an iteration on the hostnames - numerically or alphabet. Is this hardcoded to be required? Or is it possible to bypass this with a customer's standard that doesn't have an iteration appended to it? For example, I want to have "server01p/server02p/server03p/etc" versus "server01pa/server02pa/etc"
Is this possible through the GUI installer? Json?
Haven't been able to find any docs yet that call this out, so was looking for a sanity check if anyone happens to know the answer - thanks!
-K
1255
0
Posted June 28th, 2017 03:00
Hi echolaughmk,
In the initial setup after 4.0.200, you can specify the starting iterator with offset and suffix for host names.
For example, you set the prefix "vxesxi" ,separator "-", numeric "00X", offset "5", suffix "a",
the hostnames are set as vxesxi-005a.rail.local, vxesxi-006a.rail.local, vxesxi-007a.rail.local, vxesxi-008a.rail.local, ...
It can be set in GUI or JSON.
1255
0
Posted June 28th, 2017 11:00
Thanks kawaman. It sounds like that verifies my thoughts that the interator cannot be removed from all the docs I have already read - which is what the customer wants to do to stick to their standards. Even the new checklist/install doesn't seem to allow that iterator to be ignored form the config.
thanks,
-K
VincentJansen
1 Rookie
•
67 Posts
1255
0
Posted June 27th, 2017 22:00
Have already checked Solve Desktop? There are all VxRail procedures documented.
If you not familiar with Solve Desktop you can find more info here: https://community.emc.com/docs/DOC-57035
Cheers!