Have you tried the Troubleshooter for Windows-Update?
What is the KB number?
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
This will take some research. My guess right now is that KB4338819 has been superseded, or there is a missing prerequisite update.
On the v1803 machine I just checked ... it it "up-to-date", but KB4338819 is not listed in Installed History (but a higher-numbered one is installed).
Here are some general tips and notes for Windows-Update:
- Switch your machine to the update-ring for Organization and Business. This provides time for patched superseded updates to be released, and then only those "fixed ones" ever install.
- Yes, I've seen something like this before. Sometimes you have to wait for the next full-milestone release to be installed to fix it. For example, if this was going-on on v1709, when v1803 finally installs, it usually fixes it.
- When a full-milestone update installs (like v1803) it resets all the logs (Update History and Windows Reliability Report)
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Here are my (abridged) notes about general Windows-Update checks/fixes:
The first thing you need to do to see if your "component stores" it corrupted and to see if it repairable is to open command prompt as ADMIN, after you have opened that you need to type this : dism /online /cleanup-image /scanhealth
This will let you know if there is a problem with your windows. If it says "No Component Store Corruption Found" ... you are done. - So, go to Updates and see if you can be "up to date".
Then run this to see if its repairable. dism /online /cleanup-image /checkhealth
This will tell you if it repairble or if there is a problem with your windows.
If it is not repairable you will have to either try to repair it with an "over-lay install" with DVD/USB-Installer or most likely do a clean install.
If it is repairable you will then run this command:
dism.exe /online /cleanup-image /restorehealth
If it fails, and stops early, try again.
==============================
You can also open an Elevated Command Prompt, for a full system scan and have SFC attempt repairs: sfc /scannow
I think SFC checks currently used Windows files, while DISM is for the Windows Image ... used for installs, updates, and reconfigs.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
ah. yes ive tryed the updaterTroubleshooter and it did not work.
Problem update is: KB4338819
Yes, it was superseded. Sounds like some fixed it with varying success. My experience is ... once these bad updates start installing (and never finish) it's hard for Windows to get the better-one on there instead. The next milestone update might fix it, but that is still a ways off.
KB4338819 - 2018-07 Cumulative Update for Windows 10 Version 1803 for x64-based Systems (KB4338819) -Error 0x80070002
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
My brand new Aurora A7 had the same issue last year and I tried and tried to fix it (with a very limited skill set). Luckily it was within the return period at Best Buy so I just took it back. The exact same model has been working fabulously over the past year except for the fact that everyday it asks me to update my bios....
The frustrating part of this whole thing was that it was the Alienware Update tool that caused the issue but Dell support insisted that it was a Windows problem (much like above). Anecdotally the problem hasn't occurred since I've avoided the update...
Here are my (abridged) notes about general Windows-Update checks/fixes:
The first thing you need to do to see if your "component stores" it corrupted and to see if it repairable is to open command prompt as ADMIN, after you have opened that you need to type this : dism /online /cleanup-image /scanhealth
This will let you know if there is a problem with your windows. If it says "No Component Store Corruption Found" ... you are done. - So, go to Updates and see if you can be "up to date".
Then run this to see if its repairable. dism /online /cleanup-image /checkhealth
This will tell you if it repairble or if there is a problem with your windows.
If it is not repairable you will have to either try to repair it with an "over-lay install" with DVD/USB-Installer or most likely do a clean install.
If it is repairable you will then run this command:
dism.exe /online /cleanup-image /restorehealth
If it fails, and stops early, try again.
==============================
You can also open an Elevated Command Prompt, for a full system scan and have SFC attempt repairs: sfc /scannow
I think SFC checks currently used Windows files, while DISM is for the Windows Image ... used for installs, updates, and reconfigs.
If the above fails, then I'd start looking at software conflicts. It took me over a month to discover that an anti-cheat system resource was installed by Steam, causing slow and fast ring insider updates to break. Removing that corrected the issue immediately.
Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
3445
0
Posted August 10th, 2018 22:00
Possibly, but that is a Microsoft problem.
Have you tried the Troubleshooter for Windows-Update?
What is the KB number?
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.