Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
Setting up new host
we have a CX300 SAN installed which is fibre connected to our Dell blade server chassis (1855).
I have built a new blade server and now need to configure it to access the storage on the SAN.
The SAN was originally installed by Dell and since then has never been touched until now, so I have no experience or knowledge of the SAN other than logging on to Navishere and creating storage groups.
I have tried installing the navisphere agent onto the new server but this does not seem to work, I have looked at some documentation but everything seems to be focused on the SAN itself and not the clients.
Can anyone help me?
I have built a new blade server and now need to configure it to access the storage on the SAN.
The SAN was originally installed by Dell and since then has never been touched until now, so I have no experience or knowledge of the SAN other than logging on to Navishere and creating storage groups.
I have tried installing the navisphere agent onto the new server but this does not seem to work, I have looked at some documentation but everything seems to be focused on the SAN itself and not the clients.
Can anyone help me?
M.Hani
2 Intern
•
138 Posts
134
0
Posted September 24th, 2007 04:00
You have to install HBA, HBA driver, PowerPath, Host Agent in the client side.