Unsolved
This post is more than 5 years old
16 Posts
0
1812
June 19th, 2008 13:00
The clone_activate operation is not a valid operation on this operating sys
I am trying to activate a clone on a new host using admsnap clone_activate. The following message is returned:
Scanning for new devices.
The clone_activate operation is not a valid operation on this operating system.
When I issue the powermt command to display all devices, I do not see the cloned luns. I'm not sure what I am missing. Any suggestions?
Scanning for new devices.
The clone_activate operation is not a valid operation on this operating system.
When I issue the powermt command to display all devices, I do not see the cloned luns. I'm not sure what I am missing. Any suggestions?
No Events found!
calle2
133 Posts
0
June 20th, 2008 01:00
Welcome to the foums. Can you tell us a little bit more about your CLARiiON setup as well as what is your Host OS?
Have you tried rebooting your Server? I assume you have already synchronized, fractured and presented the clone to the Server's Storage Group.
Carl
SLRobb
16 Posts
0
June 20th, 2008 07:00
We did end up rebooting and now I can see the luns via admsnap list and powermt display dev=all, however, the os still does not see them and I keep getting the same response.
calle2
133 Posts
0
June 20th, 2008 08:00
Your choices are either to reboot the server or unload and load the HBA driver.
SLRobb
16 Posts
0
June 23rd, 2008 09:00
Can you tell me where to find that document that you referenced? I'm having trouble locating relevent documentation.
calle2
133 Posts
0
June 23rd, 2008 15:00
As for why the OS behaving the way it is maybe one of the Linux gurus on the forum could shed some light on it...
SKT2
2 Intern
•
1.3K Posts
0
June 23rd, 2008 17:00
symmask -sid xxxx set hba_flags on V -disable -wwn 2100001b320d04c7 -dir 4d -p 0
symmask -sid xxx set hba_flags on V -disable -wwn 2100001b320dedc8 -dir 13d -p 0
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
June 23rd, 2008 18:00
SKT2
2 Intern
•
1.3K Posts
0
June 23rd, 2008 18:00
RRR
6 Operator
•
5.7K Posts
0
June 24th, 2008 07:00
I'm seeing more and more news letters coming that mention CX4-80 and so. Especially on searchstorage.com
Allen Ward
6 Operator
•
2.1K Posts
0
June 24th, 2008 07:00
With FLARE 32 and Solutions Enabler 8.3 you can do wonderful things
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
June 24th, 2008 07:00
Allen Ward
6 Operator
•
2.1K Posts
0
June 24th, 2008 08:00
Allen Ward
6 Operator
•
2.1K Posts
0
June 24th, 2008 08:00
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
June 24th, 2008 12:00
RRR
6 Operator
•
5.7K Posts
0
June 26th, 2008 03:00
I think an EMC CE told me once of a customer where a Symm fell though the lifted floor and was still running after that incident. Not even a singlle disk failed !