UNSOLVED
M
melzerpinto
3 Posts
0
5125
November 4th, 2009 13:00
MD1000
Hi,
Has anyone tested the MD1000 throughput with a Poweredge R610? I've seen the test results conducted by Dell using iometer but I'm not able to get anything greater than 480 MB/s. The MD1000 has 10 drives configured in RAID10 and the OS is SLES 10 SP2. I'm using a single controller.I used Iometer like in the Dell tests.I'm using Perc 6/E and the virtual disk has a stripe size of 64k
When I use 2 controllers(same server) and stripe an LVM, I get about 630 MB/s which I still think is pretty low. The MD1000 is running in unified mode. If anyone has conducted tests, can they share their results?
Thanks
Melzer
Has anyone tested the MD1000 throughput with a Poweredge R610? I've seen the test results conducted by Dell using iometer but I'm not able to get anything greater than 480 MB/s. The MD1000 has 10 drives configured in RAID10 and the OS is SLES 10 SP2. I'm using a single controller.I used Iometer like in the Dell tests.I'm using Perc 6/E and the virtual disk has a stripe size of 64k
When I use 2 controllers(same server) and stripe an LVM, I get about 630 MB/s which I still think is pretty low. The MD1000 is running in unified mode. If anyone has conducted tests, can they share their results?
Thanks
Melzer
