Solved!
Go to SolutionClosed
Performance test on specific interface
Hi,
Is there a way to run a performance test on a specific interface? I have two arrays PROD and DR over a 10G. I would like to run a benchmark without going over the management interface. I am just looking to test the replication interface. Is there a way to do this through iperf3 or perhaps a workaround using nc or rsync?
Thanks,
DELL-Josh Cr
Community Manager
•
9744 Posts
•
44404 Points
598
0
Posted May 22nd, 2023 06:00
Hi,
Thank you for your question. Check out this article, it isn’t exactly this but it has some networking testing info https://dell.to/3MrYAvr.
Let us know if you have any additional questions.
DELL-Josh Cr
Community Manager
•
9744 Posts
•
44404 Points
593
0
Posted May 22nd, 2023 09:00
Looks like you need to be logged in with an account with the product attached to the account. Try this one instead https://dell.to/3BTOyhD
Phil.Lam
4 Apprentice
•
642 Posts
•
15 Points
587
0
Posted May 22nd, 2023 13:00
@macyero , you can use iperf3 to test the plumbng of your network. you have to use ifconfig or isi network interfaces list to get the IPs of the interfaces first
https://www.dell.com/support/kbdoc/en-us/000188735/using-iperf3-with-onefs?lang=en
example:
SERVER
Isilon01-2# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 10.135.134.22, port 23486
[ 5] local 10.135.134.41 port 5201 connected to 10.135.134.22 port 28311
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.15 GBytes 9.89 Gbits/sec
[ 5] 1.00-2.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 2.00-3.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 3.00-4.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 4.00-5.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 5.00-6.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 6.00-7.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 7.00-8.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 8.00-9.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 9.00-10.00 sec 1.15 GBytes 9.90 Gbits/sec
[ 5] 10.00-10.00 sec 131 KBytes 9.77 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 11.5 GBytes 9.90 Gbits/sec
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 11.5 GBytes 9.90 Gbits/sec receiver
CLIENT
CLIENT01# iperf3 -c 10.135.134.41 -B 10.135.134.22
Connecting to host 10.135.134.41, port 5201
[ 5] local 10.135.134.22 port 28311 connected to 10.135.134.41 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 1.00-2.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 2.00-3.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 3.00-4.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 4.00-5.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 5.00-6.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 6.00-7.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 7.00-8.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 8.00-9.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
[ 5] 9.00-10.00 sec 1.15 GBytes 9.90 Gbits/sec 0 157 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 11.5 GBytes 9.90 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 11.5 GBytes 9.90 Gbits/sec receiver
iperf Done.