UNSOLVED

seasider17

updated

4 years ago

S

seasider17

1 Rookie

5 Posts

0

1030

September 8th, 2022 03:00

Latitude 5410, Stop code: INACCESSIBLE_BOOT_DEVICE

We are having this issue across our Dell laptop estate. A user can be working one day, power off then power up the next day and get this message. The reason is the "SATA Operation" field has been changed from "AHCI" to "Raid". We are not aware of any updates (Dell or Windows). We first thought this could be due to weak BIOS batteries (as the result is like a bios reset) but it is now happening to newer laptop models. 

Any help would be appreciated.

  • seasider17

    1 Rookie

    5 Posts

    642

    0

    Posted September 8th, 2022 05:00

    Hi JOcean, The truth is no we havent. Some of the other older dell laptops have BIOS batteries encased in a plastic so we would need to order in the replacements. But this issue is happening to laptops that are just over 18-months old.

     

    I am currently investigating BIOS versions. The version on the machine that has the issue is 1.4.3 23/12/2020. I will run a full dell update and see if the BIOS is updated. 

  • JOcean

    11 Legend

    12621 Posts

    69453 Points

    643

    0

    Posted September 8th, 2022 05:00

    This forum post may help and did you try changing the CMOS battery in any of the units to determine if that is the cause? This sounds like a BIOS reset which the weak battery could cause or an update. Updates may not be obvious as they are auto initiated on Dell systems.

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • seasider17

    1 Rookie

    5 Posts

    636

    0

    Posted September 8th, 2022 06:00

    Just ran a full drivers and downloads update and bios is updated to 1.15.0 11/07/2022. Would I be right in thinking this could be the reason?

  • redxps630

    11 Legend

    16327 Posts

    82876 Points

    601

    0

    Posted September 8th, 2022 10:00

    Yes if you have pushed a bios update to your user laptops, the Dell default setting for SATA operation is RAID. You need to manually change it back to AHCI on each laptop in your estate or write a custom bios group policy setting using Dell tool kit to push to all users to overwrite the new bios default.

  • filbert

    6 Operator

    1846 Posts

    600

    0

    Posted September 8th, 2022 10:00


    @redxps630 wrote:

    Dell default setting for SATA operation is RAID.


    Is there a good reason why Dell sets that default for laptops?

  • seasider17

    1 Rookie

    5 Posts

    567

    0

    Posted September 13th, 2022 03:00

    Hi, I have never experienced a BIOS reset if an update is pushed to the machine. The machine has always retained settings. Specifically AHCI in Sata Operation.

  • DELL-Chris M

    Community Manager

    56891 Posts

    232143 Points

    473

    0

    Posted November 30th, 2022 05:00

    The online Latitude 5410 Service Manual page 117 discusses the default BIOS System setup settings.

    Page 119 specifically states for SATA Operation;


    RAID ON = SATA is configured to support RAID mode (selected by default)


    DELL-Chris M (old account)

    #IWork4Dell