I would like to have support for dell applications in addition to the 18.04 lts support it will end in a few years and the vulkan is being prepared to work better in the next version of ubuntu 20.04 lts, I would just like to know if you could migrate to version 20.04 without losing support and I will have OEM support.
I say this because I managed to put the recovery system modified by dell on my pendrive, but I can't download the online version even using my laptop code on the website below, I would like to know how I will be supported.
While Ubuntu 20.04 will have Linux 5.4 by default, the OEM-certified experience may include booting (and installing) a newer kernel based on Linux 5.5 or 5.6. In addition, this latest kernel option will not be presented to users on non-certified systems.
When running the Ubuntu installer on a detected “OEM Certified” system, the plan is to also activate the respective Ubuntu OEM package files. As such, additional packages are sometimes offered.
There will be a single graphics stack compatible with both OEM and
Generic kernel flavours.
The installation media will contain both generic and oem kernel flavours.
On non-certified machines, generic kernel will be the default with no
changes to the installer or the installed system.
On certified machines, identified precisely by smbios grub module
(i.e. equivalent to matching by vendor, sku, product ids as seen in
dmidecode) may boot to the OEM kernel for installation by default.
as a dell customer, in my case, i bought a device last month, can i upgrade from version 20.04 lts with dell OEM support? since it is not possible to download the linux iso from the dell website?
I would just like to know how I would upgrade to the new version with dell support, without downloading the iso from the ubuntu website or upgrading manually
I have an inspiron 7460 and upgraded my ubuntu from 18.04 LTS to 20.04 LTS, accepting development version. I can use it yet. But couldn't boot using 5.4 nor 5.3 kernels. I'm booting with 4.15 that was still avaliable (for my good).
I researched and tried to boot passing nomodeset on the boot line, but had no effect. I don't know how to look what is blocking booting with new kernels. But looking for my drivers, it says "1 proprietary driver is in use", i just think it may be because of Dell drivers not supported, even though I have looked and all devices use drivers that have written beside OPENSOURCE.
I'm running 20.04 on an XPS 13 7390 Developer Edition. I had to do a full reinstall to get WiFi working. Without the reinstall, it was confused about which chip was in the Intel Wifi, resulting in a stable connection to the AP but unusable internet performance.
For the filesystem, I'm using full disk (full pool, actually) encryption under ZFS successfully. This was a ton of work to get going right - I don't recommend ZFS or encryption on ZFS yet.
The issue I'm still having is that my WD19TB dock does not work as well under 20.04. When the XPS 13 is awakened from sleep mode (mem_sleep_default set to deep rather than s2idle, which it had defaulted to), USB devices don't work right. A power cycle of the dock (not the laptop) gets things working again.
Thanks @slopedog for taking one for the team with the early install!
I use the same model, XPS 13 7390, for my primary work computer. I'm not surprised that it's too early to think about easily upgrading just yet, but always nice to have the early reports about what needs work.
Disabling the Intel wifi drivers fixed the connection issues for me. Everything is running surprisingly smooth. No hiccups other than the initial slow wifi performance. Edit: I am using a Precision 5540.
Which is great in theory. What I am wondering is, is whether the Dell XPS for example (last year's or older) count as certified hardware for 20.04 or do we need to wait for this new neat trickery to actually work until the specific devices are also listed in the Ubuntu certified hardware database for 20.04 explicitly... which might still be a while off
With a Precision 5540, there are serious battery issues. Power consumption is consistently > 22W even after the Wifi solution you mention... at least that was the case for me.
I agree battery life is worse for the Precision 5540 after the upgrade, but not by much for me at least. I will have a better idea when I use IntelliJ this evening, so far I have only browsed the internet and used some python books. I am floored at how well everything works though, and the option to use the graphics card on demand has been really cool.
speedstep
11 Legend
•
46969 Posts
51652
0
Posted March 2nd, 2020 08:00
Ubuntu 20.04 LTS is not yet released
Official release date is April 23, 2020.
Current LONG TERM SUPPORT is bionic 18.04