UNSOLVED
P4317Q, Daisy Chain setup
I was under the impression one mini display port 1.2 cable could be hooked up and it would chain. I figured there would be a 1.2 to activate in the monitor. Am I wrong and need to have a setup that can support 4 monitors? Trying to hook it up to a Gigabyte GB-BSi3-6100. Is the other option to make this work use a mDP, hdmi, and two usb connections?
2106
0
Posted August 12th, 2016 19:00
So, I just need to get a different computer and put in a graphics card that can handle 4 out. I had a feeling it would not work, but I had a backup use for the gigabyte.
2106
0
Posted August 12th, 2016 21:00
Can you recommend a graphics card for this monitor?
2106
0
Posted August 12th, 2016 21:00
StarTech.com Mini DisplayPort to HDMI Multi Monitor Splitter - 3-Port MST Hub - mDP 1.2 to 3x HDMI MST Hub
Will this work?
2106
0
Posted August 13th, 2016 07:00
In theory, that would give you three monitors connected to the Gigabyte GB-BSi3-6100 mDP out. Then a fourth monitor connected to the Gigabyte GB-BSi3-6100 HDMI out.
Gigabyte GB-BSi3-6100 mDP out --> mDP to HDMI Multi-Monitor Splitter -->
HDMI 1 --> HDMI to HDMI cable --> Monitor 1 HDMI in
HDMI 2 --> HDMI to HDMI cable --> Monitor 2 HDMI in
HDMI 3 --> HDMI to HDMI cable --> Monitor 2 HDMI inGigabyte GB-BSi3-6100 HDMI out --> HDMI to HDMI cable Monitor 4 HDMI in
Of course that is on the assumption that the Gigabyte GB-BSi3-6100 can actually drive four monitors.
Or a different computer and a video card that has four DP (DisplayPort).
DELL-Chris M (old account)
#IWork4Dell
2106
0
Posted February 1st, 2017 07:00
In reference to the miniDisplayPort. does it only support mdp to dp? I am currently trying a mdp to mdp cable and it doesn't seem to work. the mdp to dp works fine. please advise. thank you!
2106
0
Posted February 1st, 2017 08:00
ryanq71,
I do not fully understand your question.
"I am currently trying a mdp to mdp cable"
From what device (P4317Q) ? to what device?
Explain in detail your entire setup =
* To what computer model is the monitor? attached?
* What video card/GPU is in the computer?
* What video out ports are on the video card/GPU or computer?
* List all monitor cabling attached to the computer and the ports they are using
DELL-Chris M (old account)
#IWork4Dell
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
2106
0
Posted August 12th, 2016 19:00
DP (DisplayPort) daisy chaining can only be done if the monitor has a DP out port. You cannot daisy chain from DP/mDP to HDMI, VGA, DVI, or USB.
The P4317Q does not have a DP out port. It has the following IN ports =
HDMI/MHL 1, HDMI/MHL 2, mDP, DP, VGA
The only stipulation concerning DP 1.2 is that the video card DP/mDP out ports must support DP 1.2 to get the resolution of 3840x2160 60Hz. A video card that does not can only do 3840x2160 30Hz.
The Gigabyte GB-BSi3-6100 has two video out ports =
mDP, HDMI
To support four monitors in a daisy chain off of the Gigabyte GB-BSi3-6100 mDP out port, you will need to purchase monitors that have DP in port and DP out port. Like the U2414H pictured below.
#3 DP in, #4 mDP in, #5 DP out
DELL-Chris M (old account)
#IWork4Dell