UNSOLVED

zakath1701

updated

19 years ago

0

23242

February 7th, 2008 14:00

Problems with flat panel monitor

I am having a problem with a flat panel monitor I bought from dell on August 28, 2006 (so no warranty left)

 

I dont know the model number, but it was the standard monitor with the Dell E310 system and its parts number is DT188

 

The monitor will no longer turn on.  It was working fine when I turned off the computer last night, but when I turned on the computer today, the monitor would not turn on.  I had left the monitor on sleep mode.  Any ideas or am I just going to have to buy a new one?

  • 389

    0

    Posted February 7th, 2008 16:00

    1.  yes, i have tried reinserting the power cord, and I have tried it on several different outlets, with and without the surge protector.

    2. I dont get anything at all.  The usuall is green for on, yellow for standby, but im getting nothing. 

    3.  I'll try that and post results in a minute

     

    Thanks

  • europa303

    4428 Posts

    389

    0

    Posted February 7th, 2008 16:00

    Sorry if obvious, but . . .

     

    1. You've removed and reinserted the power cord into the back of the monitor, right? And you're certain the outlet is live, right?

     

    2.  When pushing the power button are you getting a green or yellow indicator or nothing at all?

     

    On rare occasion a power cord has been known to go bad.  If receiving no green or yellow indicator on the monitor can you try swapping the power cord with the computer or another monitor to verify it's a good cord?

  • 389

    0

    Posted February 7th, 2008 16:00

    ok, I tried using different power cords, and more different outlets, but still nothing.

    I heard some thunder last night, could a surge have knocked out my monitor and not my computer? because my computer works fine.

  • europa303

    4428 Posts

    389

    0

    Posted February 7th, 2008 17:00

    Sure, a surge could pop an internal fuse or fry a part, even if plugged into a surge protector.  Better the monitor to go than the computer.  Before giving up up this monitor either you or a local shop may be able to open the case and check for a blown fuse.

     

    And again, sorry if obvious, but you are pushing the correct power button on the front of the LCD, right?

    Message Edited by europa303 on 02-07-2008 02:17 PM
  • 389

    0

    Posted February 7th, 2008 18:00

    yes, I am pushing the correct power button... I at least know that much

     

    any idea what it would cost to get someone to do that?

    and i thought surge protectors were supposed to protect from that...

    I guess my surge protector is a couple years old though...

  • europa303

    4428 Posts

    389

    0

    Posted February 7th, 2008 19:00

    A local computer shop in my area charges about $50 to "diagnose" monitor problems.  However, if it's a simple issue to open the case and check for a fuse, probably considerably less. A TV repair shop could do the same.  Best of luck.  :smileyhappy:
  • 389

    0

    Posted February 7th, 2008 22:00

    thanks