After updating to Windows 10, did you uninstall the X-Rite software, reboot the computer, then reinstall the X-Rite software?

Yes. Twice.

Explain how the software is failing in detail.

It just won't offer the possibility to store hardware calibration (LUT) in CAL1 or CAL 2 as usual.

It doesn't recognise my monitor as U2413, but as DELF074.

Inspired in the post below, I have modified the "displayTechTypes.xml", but Calibration Solution still doesn't perform as usual.

en.community.dell.com/.../19512342

Contact our resident calibration pro Yumichan via private message. Click "Add as Friend". Then ask him for advice.

I've not tested W10... so I can't help there. There must be some log files un c:\Users\YOURUSER\Roaming\Dell or something similar ("Local" instead of "Roaming"). I do not know if W10 changed user configuration folders.

"Connection.log" should show issues with serial number reading (DDC/CI & USB). This kind of serial number reading issues are the main culprit of "my DCCS is not working".

Did you attempt to install the U2413 Windows 8 driver via compatibility mode into Windows 10 to change the Device Manager Generic PnP Monitor to U2413?

Do we have an update on this subject? I am also waiting it to be solved before upgrading, and I think that may be others in the same situation...

An updated driver from Dell would be the way to go, BTW (or at least confirmation that they are working on it).

Updated. The U2413 does support Windows 10.

The DUCCS offered on the driver page show that Windows 10 is supported.

So...?

Is it something that X-Rite will address soon?