UNSOLVED
S5148F-ON Multicast Routing support?
In the OS 10.4.3.0 user guide there's an important note to say "OS10 does not support multicast routing on S5148F-ON".
In the latest OS user guide there's no note in the multicast section of the user guide. There are also no notes in the OS 10.5 release notes to state whether a fix has been implemented. The latest datasheet that I have for the S5148F has no mention of multicast routing (IGMP or PIM) support.
Has multicast routing been implemented on the S5148F?
195
0
Posted February 9th, 2023 02:00
Thanks Chris,
It also appears on the data sheet that a maximum of only 36 LAGs are available on the S5148F. It would be great to know if that is still the case too.
Thanks
194
0
Posted February 9th, 2023 04:00
Hello,
in this compatibility list the S5148F is supported on OS up to 10.4.3.8
OS10 supports a maximum of 128 port-channels, with up to thirty-two ports per channel.
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!185
0
Posted February 10th, 2023 08:00
That is what appears to be the case regarding the version, as far as multicast routing I would agree as well.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!185
0
Posted February 10th, 2023 08:00
Hi Marco,
Thanks for checking. To be clear, does that mean the S5148F isn't compatible with OS 10.5 and newer?
While the OS supports 128 port channels, the datasheet for the S5148F says it only supports 36 port channels.
Also, in the 10.4.3 user guide there are notes to say that multicast routing was not supported on the S5148F. Can we say that this will still be the case on 10.4.3.8?
Thanks
152
0
Posted February 12th, 2023 19:00
Please see the attached (OS10 supported matrix for S5100 series platform).
10.4.3.8 is the latest firmware for S5148F switch... https://dell.to/3HT2FGF.. refer to the guide at page# 590 - 644.Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
212
0
Posted February 7th, 2023 11:00
ai_dd,
I believe they did add the support for the S5148f-On on 10.5 and newer versions, but I am not sure. I am trying to find a reference to that and will let you know if I find anything to confirm that.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!