UNSOLVED
Web Interface Managemt Question
Hey Guys,
For the life of my I can't workout why I cant ping anything in the VLAN 20 / 192.168.20.0 subnet or access the web interface of the switch when I plug a laptop into the switch with a static IP in 192.168.20.x range
Can someone have a look at this config and see what I've done wrong..
Thanks in advace
!Current Configuration:
!System Description "PowerConnect 6224, 3.3.5.5, VxWorks 6.5"
!System Software Version 3.3.5.5
!Cut-through mode is configured as disabled
!
configure
vlan database
vlan 15,20-21,30-31,40,50,100
vlan routing 40 1
vlan routing 20 2
vlan routing 21 3
vlan routing 15 4
vlan routing 31 5
vlan routing 30 6
vlan routing 50 7
vlan routing 100 8
vlan association subnet 10.10.50.0 255.255.255.0 50
vlan association subnet 192.168.15.0 255.255.255.0 15
vlan association subnet 192.168.20.0 255.255.255.0 20
vlan association subnet 192.168.21.0 255.255.255.0 21
vlan association subnet 192.168.30.0 255.255.255.0 30
vlan association subnet 192.168.40.0 255.255.255.0 40
vlan association subnet 192.168.100.0 255.255.255.0 100
exit
snmp-server location "Warehouse1"
snmp-server contact "Systems"
hostname "Dell6224_CWH"
sntp unicast client enable
sntp server 192.168.20.2
clock timezone 11 minutes 0
stack
member 1 1
member 2 1
exit
ip address none
logging file debug
ip routing
ip route 0.0.0.0 0.0.0.0 192.168.100.1
interface vlan 15
routing
ip address 192.168.15.1 255.255.255.0
ip helper-address 192.168.20.20
exit
interface vlan 20
routing
ip address 192.168.20.30 255.255.255.0
exit
interface vlan 21
routing
ip address 192.168.21.1 255.255.255.0
ip helper-address 192.168.20.24
exit
interface vlan 30
routing
ip address 192.168.30.1 255.255.255.0
exit
interface vlan 31
routing
exit
interface vlan 40
routing
ip address 192.168.40.1 255.255.255.0
exit
interface vlan 50
routing
ip address 10.10.50.2 255.255.255.0
exit
interface vlan 100
routing
ip address 192.168.100.2 255.255.255.0
exit
username "switch" password 6ab09f1aa53b183a3c9bd8c44d33bab5 level 15 encrypted
sflow 1 destination owner 1 timeout 4281977485
sflow 1 destination 192.168.21.47 9996
sflow 1 destination maxdatagram 2500
sflow 2 destination owner 2 timeout 4252808556
sflow 2 destination 192.168.21.65 8889
!
interface ethernet 1/g1
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g2
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g3
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g4
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g5
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g6
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g7
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g8
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g9
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g10
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g11
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g12
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g13
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g14
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g15
sflow 1 sampling 1024
sflow 1 polling 30
exit
!
interface ethernet 1/g16
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g17
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g18
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 40
exit
!
interface ethernet 1/g19
sflow 1 sampling 1024
sflow 1 polling 30
description '###CONX-TO-DR8024###'
switchport mode trunk
switchport trunk allowed vlan add 15,20-21,30-31,40,50
exit
!
interface ethernet 1/g20
sflow 1 sampling 1024
sflow 1 polling 30
switchport access vlan 20
exit
!
interface ethernet 1/g21
sflow 1 sampling 1024
sflow 1 polling 30
switchport mode trunk
switchport trunk allowed vlan add 15,20-21,30-31,40,50
exit
!
interface ethernet 1/g22
sflow 1 sampling 1024
sflow 1 polling 30
exit
!
interface ethernet 1/g23
sflow 1 sampling 1024
sflow 1 polling 30
exit
!
interface ethernet 1/g24
sflow 1 sampling 1024
sflow 1 polling 30
exit
snmp-server community DefaultSuper rw ipaddress 192.168.21.47
snmp-server community DefualtSuper rw ipaddress 192.168.21.47
exit
DELL-Josh Cr
Community Manager
•
9752 Posts
•
44578 Points
502
0
Posted October 23rd, 2013 16:00
If the ports are showing inactive it is not
connecting, it isn’t making a link, do those ports have link lights? It looks
like a connection issue.Hey Josh,
Results from that are
Port Type Duplex Speed NegLink Flow Control
State Status
----- ------------------------------ ------ ------- ---- --------- ------------
1/g1 Gigabit - Level N/A Unknown Auto Detach Inactive
1/g2 Gigabit - Level N/A Unknown Auto Detach Inactive
1/g3 Gigabit - Level N/A Unknown Auto Detach InactiveHi, which port are you connecting the laptop to? Does it have a link light? - It's currently plugged into interface port 1 and its show link lights
Does it show the proper ip addresses and the management vlan is 20 with the command show ip interface Dell6224_CWH#show ip interface
Management Interface:
IP Address..................................... 0.0.0.0
Subnet Mask.................................... 0.0.0.0
Default Gateway................................ 0.0.0.0
Burned In MAC Address.......................... D067.E59C.F5EC
Network Configuration Protocol Current......... None
Management VLAN ID............................. 1
Routing Interfaces:
Netdir Multi
Interface State IP Address IP Mask Bcast CastFwd
---------- ----- --------------- --------------- -------- --------
vlan 40 Down 192.168.40.1 255.255.255.0 Disable Disable
vlan 20 Down 192.168.20.30 255.255.255.0 Disable Disable
vlan 21 Down 192.168.21.1 255.255.255.0 Disable Disable
vlan 15 Down 192.168.15.1 255.255.255.0 Disable Disable
vlan 31 Down 0.0.0.0 0.0.0.0 Disable Disable
vlan 30 Down 192.168.30.1 255.255.255.0 Disable Disable
vlan 50 Down 10.10.50.2 255.255.255.0 Disable Disable
vlan 100 Down 192.168.100.2 255.255.255.0 Disable Disable
Does it show the ports in access mode with show interfaces switchport Dell6224_CWH#show interfaces switchport ethernet 1/g1
Port: 1/g1
VLAN Membership mode:Access Mode
Operating parameters:
PVID: 20
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status:Disabled
Protected:Disabled
Port 1/g1 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
Static configuration:
PVID: 20
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Port 1/g1 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
20 Untagged
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Thanks again for your help
DELL-Josh Cr
Community Manager
•
9752 Posts
•
44578 Points
502
0
Posted October 23rd, 2013 16:00
The state of all of the vlans is down. If you run show interface status
Does it show the ports as up?
This is doing my head in..
I've changed laptops, cables and shutdown the port and enabled it again and finally reloaded the switch.
The laptop is showing that there is a but 1gb connection "no network access" . The interface 1 on the switch is lighting up and flashing
But the interface status is still showing inactive in the cli command.. time to take out the old baseball bat? :emotion-39:
DELL-Josh Cr
Community Manager
•
9752 Posts
•
44578 Points
502
0
Posted October 24th, 2013 07:00
I assume it is plugged into 1/g1? Try assigning vlan 1, which is the management vlan an ip address on a different subnet and see if it will let you connect to that.
DELL-Josh Cr
Community Manager
•
9752 Posts
•
44578 Points
502
0
Posted October 23rd, 2013 08:00
Hi, which port are you connecting the laptop to? Does it have a link light?
Does it show the proper ip addresses and the management vlan is 20 with the command show ip interface
Does it show the ports in access mode with show interfaces switchport