RuckusVol

updated

3 months ago

R

RuckusVol

1 Rookie

6 Posts

2 Points

0

1819

July 18th, 2024 04:22

R740 GPUs

I have an R740 LFF with riser configuration 1B+2A+3A. I want to install a GPU that won't cause the fan minimum to increase due to being a third party PCIe card. Without the cards I've tried, fan minimum is 7% PWM. With the GPU installed the minimum is 29%. Inlet air temp is the same and PCI airflow is disabled. Without PCI airflow enabled it's even higher. 

I'm trying to find a list of GPUs that won't be treated as third party and hopefully wouldn't increase fan speed unnecessarily. I've found the list of certified GPUs, including P100, P4000, K80, K40, M10, and Grid M60. That excludes other GPUs like the P400, Quadro P5000/6000, T4, etc that are used in other Dell servers. 

They may not be certified for the R740, but would they be treated as third party cards or not?

Where can I find the GPUs that are not considered third party for the R740? Or is the certified list all of the non-third party GPUs?

Thanks!

  • DELL-Erman O

    Moderator

    2984 Posts

    14874 Points

    0

    0

    Posted January 29th, 2026 14:21

    Hello,

    If you're running a Tesla T4 right now and thinking about an upgrade, according to Dell’s own GPU support matrix, the R740 supports everything from the T4 all the way up to V100, A10, A40 and even A100 PCIe

    If you’re moving from a T4 to any of the larger double‑width GPUs, expect to need a few hardware additions:

    • GPU Enablement Kit (high‑performance fans + GPU power cables). R740 owners upgrading from T4 have confirmed this is required. 
    • Correct Riser – Typically Riser 1A (330‑BBMO) for double‑width cards.

     

    Hope that helps!

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • DELL-Erman O

    Moderator

    2984 Posts

    14874 Points

    0

    1

    Posted July 18th, 2024 08:51

    Hi,

    If a GPU is not on the certified list provided by Dell for the R740, it is generally considered a third-party GPU. The certified list from Dell is effectively the list of non-third-party GPUs.

    Stick to the GPUs on the certified list to avoid the increase in fan speed. For other GPUs not listed, they are likely to be treated as third-party and cause increased fan speeds unless Dell releases a firmware update that includes them.

    You can check this PowerEdge Server GPU Matrix

    and GPU options for R740

     

    Hope that helps!

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Dong.NH

    1 Rookie

    1 Message

    5 Points

    0

    0

    Posted June 5th, 2026 14:19

    Hi, I'd like to ask about running a local AI model on a Dell PowerEdge R740xd server (Gen 14) equipped with dual Intel Platinum 8xxx CPUs and 512GB of RAM. The use case is local AI inference and lab practice. Could you advise which NVIDIA Tesla GPU series would be the best fit for this server configuration? Any recommendations on compatibility, form factor, or performance tiers would be greatly appreciated. Thank you!

  • RuckusVol

    1 Rookie

    6 Posts

    2 Points

    0

    0

    Posted July 19th, 2024 02:49

    Thanks for the help. I'll get a certified GPU. 

  • Pritam Pramanik

    1 Rookie

    1 Message

    2 Points

    0

    0

    Posted January 29th, 2026 09:39

    Can i get the help for power edge R740 server GPU, currectly following GPU is been in user in my server, need an upgrade

    NVIDIA Tesla T4 16GB GDDR6 graphics card (PN-0HCKJM)