Solved!
Go to SolutionT
TheMattHatter
1 Rookie
•
33 Posts
0
548
February 21st, 2023 08:00
T340 Memory Error w/ UDIMMs
I have a T340 with 64gb 2666 UDIMM (4x16GB) with E-2174G and system shows "Memory Error; an error was detected during memory initialization. Verify DIMMs are properly seated and that they are installed in correct slots."
I was able to get the unit to POST and updated firmware/BIOS by swapping the processor with a Celeron G4930 but when i reinstall the E-2174G the memory error comes back and unit will not POST. I've swapped DIMM slots over and over and drained flea power. I also tried other UDIMMs but the error remains. any insight?
DELL-Young E
Moderator
•
5421 Posts
•
37 Points
254
0
Posted February 21st, 2023 19:00
Hello,
- Can Intel Celeron G4930 processor recognize all your memories.
- I'd also run POST with only one memory on each.
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
TheMattHatter
1 Rookie
•
33 Posts
233
0
Posted February 23rd, 2023 07:00
Yes, the Celeron G4930 recognized all DIMMs. Turned out to be a bad processor. Ordered another E-2174G and the issue was resolved.