I switched it on today and got a screen with just black and white noise (very similar to this http://www.motionelements.com/media/s/53/513724/a-0527.jpg)
Fixed it! Turns out the brown ribbon that connects the main board to the top bit was just a little loose. Pushed it back in and pushed the clip thingy closed and it's working fine now.
Paperkrain
4 Posts
526
0
Posted March 29th, 2013 08:00
oh my :S
Well, you can try one thing.
1. Turn on your projector.
2. Turn off your projector and wait for the cooldown.
3. Unplug all cables including the powercord.
4. Press and hold down the power button for 30 seconds.
5. Plug power and turn on.
If this doesn't work, you really should call Dell and tell them your problem. They have great customer service (eventually, once you get through ^_^)
Good luck