Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
Thanks for the reply.
We've been building RHEL, and we're building 20 or so.
There are 5 disks, but slots 0 and 1 with the same capacity are configured as RAID1, and the rest are not in use yet.
During installation and configuration on the two servers, the disk sda is not visible and the output is from sdb. I think I've had this happen before, but I couldn't solve it.
For what reason?
DELL-Joey C
Moderator
•
4170 Posts
•
20965 Points
165
0
Posted May 11th, 2023 20:00
Hi @GIZGIZ,
Usually it happens when the RAID container is not fully detected before other drives are detected. From the lsblk output, are all the drives detected?
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
183
0
Posted May 11th, 2023 08:00
Hello GIZGIZ
This Knowledge Base Article Number: 000132092 may help:
Ubuntu Linux Terms for your Hard Drive and Devices Explained : https://dell.to/3I36KJd
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!