Solved!
Go to SolutionPE R450 without Risers
I added a second processor to the R450 server purchased with one Xeon Silver 4314 processor. An error is displayed after startup:
HWC8010 The System Configuration Check operation resulted in the following issue: Config Missing: Riser 2.
Is it possible to start the system without Riser 2 so that the error does not appear? I don't need a PCI device (in Riser 1 and Riser 2).
If I configure the server in the Dell shop, it is also possible to select the "No PCIe Riser" option. I assume that the possibility of starting without Riser 2 is possible.
DELL-Young E
Moderator
•
5421 Posts
•
37 Points
1029
0
Posted June 15th, 2022 20:00
Hi, I'm afraid it's not possible. You will get errors during POST.
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!I think Riser 2 only checks the server if Riser 1 is present. I haven't tried it, but it's a tip if someone solves a similar problem. If Riser 1 is removed, the empty space will need to be closed.
I ordered the Riser 2c (5NV48) in case I needed to connect something to PCIe over time.
Thanks for the help.
DELL-Young E
Moderator
•
5421 Posts
•
37 Points
943
0
Posted June 20th, 2022 00:00
Hi, I'm afraid we do not have access to SKU. Sorry I can't be of help this time.
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Shine K
6 Operator
•
3042 Posts
1028
0
Posted June 15th, 2022 20:00
CPU 2 need second riser. C34RV is the part number of second riser.
Can you remove riser and check the behavior. I believe R450 with 2 CPU will work without risers also.