Hi JRP,

the only command i have come across is

symstat -type cache -i xx -c XX -sid XXXX -repType rdfa

below is the example from the cli guide


symstat -type CACHE -RepType rdfa -sid 16


SRDF/A Session Cache Summary Information

Symmetrix Id : 00019030xxxx

Timestamp : 06:20:44
System Write Pending Limit : 364376 (11.12 GB)
Cache Slots available for all SRDF/A sessions : 342513 (10.45 GB)
Total Local Write Pending Count : 0
Total System Write Pending Count : 0


Session Rdfa DSE Cache Cache
RA --------------------- --------------- Slots Full
Device Group Name Grp Type Num Pri Status Thr UsedTrks In Use (%)
----------------- --- ---- --- --- -------- --- ----------- ----------- -----
RaGrpNum_63 63 RDF1 62 33 Active 60 0 0 0.0
RaGrpNum_05 5 RDF1 4 33 Active 60 0 0 0.0
Total ----------- ----------- -----
Slots 0 0 0.0
GB 0.00 0.00


have a look at the doc : P/N 300-002-939, REV A05, cache stats, page180.

Message was edited by:
MikeMac
Removed Symm S/N

have a look here
http://forums.emc.com/forums/thread.jspa?threadID=86119&tstart=0