Thanks for the response ! Is there any report I can pull out from  SMC ?  Which option from  SMC will give the complete host allocated  capacity  information ?

Thanks for all the response.

I am aware about the symaccess show view command and  list capacity -host command. that all will give only  the deatils about a single host. suppose if i have 1000 server, i need to  run the command for the 1000 times.  !!!

What i am looking for is,  is there any simple way to see the allocated capacity for the 1000 servers ? some kinda report  or something like that ?

Thanks  Dynamox,   as always you will comes up with some answer   We do have  prosphere , we no longer use ECC.

so could you plz  give some idea, how to pull  that details from prosphere ?

SMC will help you J

Regards,

Periyakaruppan N (Peri),

Try

Symaccess –sid xxxx show view xxxxxxxxxx

Regards,

Periyakaruppan N (Peri),

Single command to see the total allocated space to a host /initiators:

C:\Users\srohilla>symaccess list devinfo -ig ATL-CLCUST01_IG -sid XXXX

Symmetrix ID          : 000XXXXXXXX

Initiator Group Name  : ATL-CLCUST01_IG

Last updated at       : 12:50:29 PM on Tue Dec 11,2012

  Host Initiators

    {

      IG   :atl-pc-b23102_IG

      IG   :atl-pc-b23104_IG

      IG   :atl-pc-b23103_IG

    }

  Sym                                 Host      Cap

  Dev   Dir:P Physical Device Name    Lun  Attr (MB)   Masking View Name

  ----- ----- ----------------------- ---- ---- ------ -----------------

  028D  07E:1 Not Visible                1  (M) 1970010 ATL-CLCUST01_MV

  0295  07E:1 Not Visible                2  (M) 1970010 ATL-CLCUST01_MV

                                                ------

  Total Capacity                                3940020

Try

Symaccess –sid xxxx show xxxxxxxxxx

Regards,

Periyakaruppan N (Peri),

if you have EMC ControlCenter or Prosphere you can generate reports like that, otherwise you can use symcli and script something like that.

I have not migrated to Prosphere myself yet but looking at the latest release notes there is a charge back module that i suspect would provide that information

https://support.emc.com/docu44992_ProSphere-1.7-Release-Notes.pdf?language=en_US

As Dynamox told me that SymmReport is not available to the customer, then for DMX if you have created aliases you could use the "symmaskdb -sid XXXX list capacity -Host hostname" command.

Also via Prosphere as Dynamox said.