UNSOLVED
VMAX3 I/O Modules
My customer wants to know how he can tell which ports are copper vs Optical on a GigE SRDF I/O Module so he can tell the harware team where to run cables. Is there a diagram and/or command available. I can;t even find pictures of the I/O module.
1888
0
Posted September 12th, 2016 18:00
If you are referring to the 4-port 1Gb/s ethernet cards with (2) copper and (2) fiber, the two lower numbered ports will be copper, the 2 higher numbered ports will be fiber. See attached.
1888
0
Posted September 20th, 2016 09:00
Can all four ports be used, or is 2 ports either copper or optical?
1888
0
Posted September 20th, 2016 09:00
All four can be used if they're all mapped to the RE emulation. (May require a BIN change.)
Anonymous User
1 Rookie
•
9 Posts
1888
0
Posted September 12th, 2016 16:00
Hi There,
Page 17
I believe you can replace the FE ports with FC or Ether (Slot 2,3,8 & 9)
https://www.emc.com/collateral/technical-documentation/h13807-emc-vmax3-reliability-availability-and-serviceability-tech-note.pdf