Hallo,

I have been playing around with this issue for way to long, so I thought I would ask around here as well.

Our current way of going about connecting:

Dell Wyse 3040 client connects to our RemoteApp, where it is supposed to start the users Personal Desktop from our VDI environment. This work for the most part, except for the connection to the Personal Desktop. I receive an error when trying to make a connection, but if i go and modify the RDS shortcut, i can see that it sets the option "Use Ts Gateway" and makes it equal to our RemoteApp server. Is it possible to uncheck this option from a WMS point of view, as i would like to be able to control all of our Thin clients from there, rather than having to do it manually 1by1 on them.

If I remove the check mark in the option "Use Ts Gateway", it will work without any problems regarding connection to the Personal Desktop, but as soon as the Terminal is restarted, it reverts to having the option checked off again, which makes it go into an error instead of connecting.

Our OS:

VDI client: windows 7 Pro

Session host / broker: Windows 2016

ThinOs: Dell Wyse 3040 (Firm, 8.5_012)

WMS: 1.2.0 40299

The error i receive:

11:38:52.361 Start session to *****.********.*****
11:38:52.394 RDP: Connect to *****.********.*****
11:38:52.926 TSG3 connection setup
11:38:52.955 RDP: NLA CredSSP Authentication
11:38:52.987 KRB: Server not found in Kerberos database. Error code:7
11:38:53.523 KRB: Server not found in Kerberos database. Error code:7
11:38:54.559 KRB: Server not found in Kerberos database. Error code:7
11:38:54.594 KRB: Server not found in Kerberos database. Error code:7
11:38:54.635 RDP: Create network detection channel
11:38:55.176 RDP: Start session to **.**.*.* (* = IP of Personal Desktop)
11:38:55.213 RDP: Connect to **.**.*.* (* = IP of Personal Desktop)
11:38:55.250 TSG3 connection setup
11:38:55.287 RDP: Resource can’t be connected.
11:38:55.324 RDP: TSG3: Can’t connect to [****-****.********.*****] through gateway. (* = FQDN of the Personal desktop)
11:38:55.399 ERROR: Connection Failed!

Pinned Posts

No conversations found!

Wyse Hardware General

Wyse USB image Tool not recognizing USB drive

my stoarage getting error

Unable to boot or install thinos in dell wyse 3040

Need mounting kit for Dell WYSE 5070 dual vesa - Non dell monitor and arm

"System configuration data read error" on Wyse Cx0 C00X

WYSE 5070- Error while checking disk size

Microsoft 365 repeatedly fails on start up

Laptop issue

ThinOS9 2505, ThinOS10 2505, WMS 5.2 releases.

Dell Alienware Aurora R11 & R12 Motherboards

Reset bios dell wyse ZX0

Optiplex 3000 thin client HDMI daughter board compatibility

M.2 standoff screw for Dell Wyse 5070

Dell Wyse 5070 reimage

dell wyse 3040 thin client configuration

Latest Solutions

3040 Can I use a monitor NOT on the compatability list

T420 W7E - change os to ThinOS

Enable Citrix MFA on Dx0D thin clients

Dell WDM workgroup license.

Connecting Wyse3040 to VDI Personal Desktop - Gateway Issue

Dell Support Resources