Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines, see the Owner’s manual at: Dell.com/Support. Before you begin, turn off the computer and disconnect all the attached peripherals.
To remove the solid-state drive twenty-two thirty, remove the six screws on the base cover. Loosen the two captive screws on the back of the base cover. Pry the cover off the system to remove it. Identify the solid-state drive and remove the screw securing it. Unlatch and lift the drive out of the system.
To reinstall the solid-state drive twenty-two thirty, place it back in the system. Re-latch and tighten the screw to secure it. Place the base cover back on the system and secure it with the eight total screws. For more information about your Dell system, visit: Dell.com/Support.
