How to replace the left control panel on a power scale F 900. As always, please ensure you are wearing ESD protection when working inside these systems turn to unlock the release latch and pull upwards. Lift off the top cover, often remove the plastic shroud, disconnect and remove the fan assembly.
Using the two outer blue levers locate and lift out the blue retainer lever and disconnect the controller panel cable using a Phillips head screwdriver. Remove the six screws holding the panel in place, working from back to front.
Carefully, remove the panel, taking care with the controller cable, fit the replacement panel, feeding the cable through the slot, attach the six screws starting from the front, reconnect the controller cable and secure with the retainer lever or the fan assembly into the chassis and walk into place. Reposition the plastic air shroud. Finally reseat the top cover and lock back into place.
Thanks for watching.
