In this video, we will demonstrate how to create a virtual machine in hyper V manager to begin go to hyper V manager. Click action new than virtual machine. The new virtual machine wizard is displayed on the before you begin page, click next on the specified name and location page. Enter the name for the virtual machine. By default, the virtual machine is saved at C colon backslash program data backslash Microsoft backslash windows backslash hyper V backslash.
It is recommended that you create and save the virtual machine at a different location to change the location, select the appropriate check box and browse to the desired location and click next on the specified generation page, select generation two and click next on the assigned memory page. If you have an eight gigabyte memory PC set, the virtual machine's memory value to three gigabytes that is 3072 megabyte. To avoid a virtual machine freeze.
If you have a 10 gigabyte or higher memory PC, you can enter a higher value as long as the new value does not cause a virtual machine freeze clear. Use the dynamic memory for virtual machine and click next on the configured networking page leave the default selection that is not connected and click next. You can start the network internet connection by navigating through computer management services and applications and then services.
You can start the network internet connection services only if automatic updates are disabled on the connect, virtual hard disk page. Select create a virtual hard disk and verify the name, location and size entries for images of smaller size, you can modify the size value to 80 gigabytes. Click next on the installation options page, select install an operating system from a boot image file such as an iso file, browse through the image file and then click next on the summary page. Review the selections and click finish.
After creating a virtual machine, you must additionally configure a few settings on the virtual machine. Select the name of the system on the right pane, click settings in the hardware section, click security and clear enable secure boot, click processor and increase the number of virtual processors from 1 to 2 in the management section, click integration services and select guest services then click apply and click. OK. This completes the process of creating a virtual machine in hyper V manager. For more information about dell image assist, visit dell dot com forward slash image assist.
