Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines, see the Owner's Manual at Dell.com/Support. Before you begin, turn off the computer and disconnect all the attached peripherals.
To remove the memory module, unlatch the side cover and slide the cover off the system. Unlatch and remove the front bezel. Find the hard drive assembly and disconnect the cables. Remove the assembly from the system. Identify the disk drive cage and disconnect the cables. Unlatch and slide the cage out of the system. Flip the cage over and disconnect the cables. Remove the cage from the system. Identify and unlatch the memory module to lift it out of the system.
To reinstall the memory module, re-latch it to the system. Place the disk drive cage in the system and reconnect the cables. Flip the cage over, slide it back into place and re-latch it. Reconnect the cables. Place the hard drive assembly back in the system and reconnect the cables. Re-latch the front bezel. Re-latch the side cover to the device. For more information about your Dell system, visit Dell.com/Support.