Follow the procedures in Before Working Inside Your Computer.
Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
Turn off your computer (see Turning Off Your Computer).
Removing the ExpressCard Module:
Remove the:
a. ExpressCard
b. battery
c. base cover
d. keyboard trim
e. keyboard
f. optical drive
g. hard drive
h. palm rest
i. Disconnect the :
ExpressCard cable from the system board
a. USH board cable from the USH board
b. Remove the screws that secure the ExpressCard module to the computer and remove the ExpressCard module.
Insert the ExpressCard module into its compartment.
Tighten the screws to secure the ExpressCard module to the computer.
Connect the:
a. ExpressCard cable to the system board
b. USH board cable to the USH board
Install the:
a. palm rest
b. hard drive
c. optical drive
d. keyboard
e. keyboard trim
f. base cover
g. battery
h. ExpressCard
Follow the procedures in After Working Inside Your Computer:
Connect your computer and all attached devices to their electrical outlets.
Turn on your computer.
