In this video, we will demonstrate how to create a virtual machine in vmware workstation pro before you begin, ensure that you have installed vmware workstation. 15.5 0.1 pro on your PC to begin open vmware workstation pro click create a new virtual machine. Select typical and click next to install the operating system, select install our disk image file and browse to the iso image to continue. Then click next. Not that when you select the iso image, the operating system is automatically detected. If the operating system is not detected, automatically select the correct operating system type manually.
Next, enter the name for the virtual machine. By default, the virtual machine is created in the documents folder. It's recommended that you save the virtual machine in an easily accessible folder. Then click next on the specified disk capacity page. For images of smaller size, you can modify the maximum disc size value to 80 gigs or for larger images set to higher value, select store virtual disc as a single file and click next.
Next click customize hardware in the memory section. If you have an eight gig memory PC set, the virtual machine's memory value to 3072 megs to avoid a virtual machine freeze. If you have a 10 gig or higher memory PC, you can enter a higher memory value. As long as the new value does not cause a virtual machine freeze in the processor section set the number of processors and number of cores per processor to two in the network adapter section.
Clear the connect at power on option in the USB controller section, select the show all USB input devices option and clear the share Bluetooth devices with the virtual machine option. In the sound card section. Clear the connected power on option in the display section, clear the accelerate 3d graphics option and finally click close and then click finish. The virtual machine is now created to verify the settings, select the virtual machine from the left pane and click edit virtual machine settings from the right pain, click the options tab in the advanced section ensure that the firmware type is UEF I and the enable secure boot option is cleared then click.
OK. This completes the process of creating a virtual machine on VM ware workstation 15.5 0.1 pro. For more information about dell image assist, go to dell.com/imageassist.
