Prerequisites
Follow the safety guidelines listed in Safety instructions.
Power off the system and all attached peripherals.
Disconnect the system from the electrical outlet, and disconnect the peripherals.
Remove the system cover.
Removing the front bezel:
Lift the retention clips at the edge of the bezel.
Unhook the bezel tabs and remove the bezel.
Removing the optical drive fillers:
On the front bezel, press the retention clip of the optical drive filler and pull the filler from the front bezel.
On the optical drive cage, hold the tabs on the optical drive filler and remove the filler from the optical drive cage.
Installing the optical drive fillers:
On the front bezel, insert the tabs on optical drive blank into the slots and push the blank until it locks in place.
On the optical drive cage, hold the tabs on the optical drive filler and push the filler into the optical drive cage.
Installing the front bezel:
Align and insert the tabs on the bezel into the slots on the system.
Press the bezel until the retention clips lock in place.
Replace the system cover.
Reconnect the peripherals and connect the system to the electrical outlet, and then power on the system.
