Dell Networking N3000 Series, Firmware Version 6.3.0.9,A16

Restart required Installed تم تثبيت هذا الملف تلقائيًا كجزء من التحديث الأخير. إذا كنت تواجه أي مشكلات، يمكنك التنزيل وإعادة التثبيت يدويًا.
The content of this page may have been automatically translated. To provide feedback, complete the form at the bottom of the page.
Dell Networking N3000 Ethernet Switch can run as Access Router or Aggregation Router based on the Firmware downloaded and run. The Firmware N3000_BGPv6.3.x.x.stk provides BGP functionality and N3000_N2000v6.3.x.x.stk features Web interface, OpenFlow, iSCSI, GARP, GVRP, GMRP, Auto-VoIP, DVLAN, MVR, and MLAG. Only the listed features are mutually exclusive while other features exist in both the variants of the builds. Please note the feature requirement and select the Firmware to download and run on N3000 Ethernet switch. Please note that since the features present in one variant of the firmware does not exist in other variant, the configuration specific to those exclusive features will fail configuration migration when switching between the firmware variants on N3000 Ethernet switch.

Both Dell Networking N3000 and N2000 Series switches share the same firmware image file (N3000_N2000v6.3.0.9.stk). If your N3000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware version 6.3.0.9 as it contains multiple bug fixes and enhancements.

After upgrading the switch firmware version to 6.3.0.9, the boot code update is required on N3000 series switches via serial console if switch is running with the older boot code version. The latest boot code version available for N3000 series switches is “U-Boot SPL 2012.10-00078-g24e99ea (Jun 24 2014 - 16:41:18)"

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.9_Release_Notes".

Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.0.9 Firmware"
Recommended

Check compatibility

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

New Features & Enhancements:
None

Fixes:
Case-ID Summary
1039629 N2048P/6.2.7.2-N2048P with 6.2.7.2 has experiened a spontaneous reboot
1048238 6.3.0.6-N2000 Switch is non-responsive to management access (SSH/Console)
1047819 6.3.0.6-PVST logs (STP TCNs and STP state change) not getting displayed after upgrade to 6.3
1037327 6.3.0.3-UTEP-Port-security-Last violation MAC address is not listed when port shutdown
1037325 6.3.0.3-UTEP-"show port-security all" CLI command output is misleading
1039920 N2048/6.2.7.4/N2048 dot1x MAB Periodic Re-Auth Failures
1047200 Update Hiveagent to version 2.62
1050364 Re-enable starting of HiveAgent on bootup
1050369 "port-security violation shutdown" command is not retained after save and reload

Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.9_Release_Notes"
Read More

Version

6.3.0.9, A16

Release date

16 مايو 2016

Download Type

Firmware

Category

Network, Ethernet & Wireless

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: N3000v6.3.0.9a16.zip
File Size: 52.77 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
ef0d7d1a9321447477ebe1ecce12fc87
SHA1:
a29dde154a228291ac337e9ecf41116498aa2883
SHA-256:
ce7ca19fe2304c74c848146732602acc8e8ccb4b780169fd5627f1fc0aae7bfa
File Format: A text file containing customer friendly fixes and enhancements information
File Name: N3000ReadMev6.3.0.9a16.txt
File Size: 4.01 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
87d6a5092a5c10282a19deb2640e19ba
SHA1:
8665497c63388202d56d1165612105d9ffc300ea
SHA-256:
4712634ca334589b440b774f7060d4ea781edc8b24acd11f0a34a22c8ad255ca

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
After upgrading to 6.3.0.9, the switch interfaces may go to D-Down state instead of STP BLK state when loop detected in the network. So we recommend to disable "loop-protection" feature globally and under all switch interfaces using the command "no keepalive" and save configuration. Also configure err-disable recovery feature by using the commands "err-disable recovery cause all" and "err-disable recovery interval 30" globally to recover the ports from D-Down state. If desired user can disable the err-disable recovery feature after ports are recovered from D-Down state by using the command "no err-disable recovery cause all"
Dell N3024
Dell N3024F
Dell N3024P
Dell N3048
Dell N3048P
(1) Download the zip file - N3000v6.3.0.9a16.zip
(2) Extract the image file "N3000_N2000v6.3.0.9.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.0.9 Firmware.pdf" extracted from zip file.

Need help with network connection issues?

Find a solution in Dell's network troubleshooting guide

Drivers help and tutorials