Ovladač pro grafickou kartu AMD FirePro V4800
Vyžadován restart Nainstalováno Tento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.Obsah této stránky byl patrně přeložen automaticky. Chcete-li vložit zpětnou vazbu, vyplňte formulář ve spodní části stránky.
This package provides the AMD FirePro V4800 Graphics Driver and is supported on Precision T1500/T3500/T7500/T5500/R5400 that are running the following Operating System: Red Hat Enterprise Linux 5.
Doporučeno
Zkontrolovat kompatibilitu
Chcete-li zobrazit nejnovější informace o ovladači pro svůj systém, zadejte podrobnosti produktu.Zadejte výrobní číslo Dell nebo model
Chcete vyhledat svůj produkt? Vložte identifikátor produktu. Ukázat způsob
Tento ovladač není kompatibilní
Tento ovladač není určen pro vybraný produkt. Vyberte jiný produkt a vložte údaje o produktu pro tento ovladač nebo navštivte stránku podpory produktu a podívejte se na všechny ovladače pro jiný produkt.
Chcete-li používat automatickou kontrolu, přihlaste se do systému Windows jako správce. Pokud jste již přihlášeni jako správce a zobrazí se tato zpráva, restartujte počítač. Váš systém spravuje správce IT – funkce mohou být omezené.
Najděte více aktualizací. Použijte nástroj SupportAssist k vyhledání nejnovějších aktualizací ovladačů.
Opravy a vylepšení
Initial Release
Další informaceVerze
8.701, A01
Datum vydání:
17 pro 2013
Typ souboru ke stažení
Ovladač
Kategorie
Video
Důležitost
VolitelnéSpolečnost Dell Technologies doporučuje tuto aktualizaci zkontrolovat a zjistit, zda je pro váš systém vhodná. Aktualizace obsahuje změny, které mají vliv pouze na určité konfigurace, nebo poskytuje nové funkce, které se mohou nebo nemusí vztahovat k danému prostředí.
Dostupné formáty Zobrazit důležité informace
Formát souboru: Soubor Zip GNU pro instalaci softwaru
Název souboru: fglrx64_6_9_0-8.701-1.dell.x86_64_2.tar.gz
Velikost souboru: 39.75 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Tento formát obsahuje soubory GNU ZIP pro instalaci softwaru.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
21aead63fbdc8f059b18b0348d622153
Stažením souhlasíte s podmínkami Licenční smlouvy na software společnosti Dell. (anglicky)
Důležité informace
Uninstalling the Driver:
If the initial installation of the driver was done using the operating system's package management software (for example, RPM or APT), use that package management software to remove the ATI proprietary Linux driver.
Uninstalling RPM Packages:
Make sure you are logged in with superuser privileges.
Run the command: rpm -e [RPM_package_name]
NOTE: Do not include the version or architecture component when running the command.
Once the ATI proprietary Linux driver has been uninstalled, you must restore the X.Org configuration (xorg.conf) file so that your system can revert to using the X.Org open source driver that ships with your operating system. Run the following command to locate the backup configuration files available on your system:
ls /etc/X11/xorg.conf.original-*
NOTE: If the xorg.conf is not restored, the open source driver may fail to start properly after the ATI proprietary Linux driver is uninstalled.
Run the following command to replace the current xorg.conf file with the latest version of the backup configuration file:
cp /etc/X11/xorg.conf.original-[version_number] /etc/X11/xorg.conf
Reboot your system. Your system should start up using the open source driver that ships with your operating system.
Uninstalling DPKG/Debian Packages
Make sure you are logged in with 'sudo' privileges.
Run the command:
sudo apt-get purge fglrx-kernel-source fglrx-modaliases xorg-driver-fglrx libamdxvba1 xorg-driver-fglrx-dev fglrx-amdcccle
NOTE: Do not include the version, architecture, or .deb file extention when running the command.
Once the ATI proprietary Linux driver has been uninstalled, you must restore the X.Org configuration (xorg.conf) file so that your system can revert to using the X.Org open source driver that ships with your operating system. Run the following command to locate the backup configuration files available on your system:
ls /etc/X11/xorg.conf.original-*
NOTE: If the xorg.conf is not restored, the open source driver may fail to start properly after the ATI proprietary Linux driver is uninstalled.
Run the following command to replace the current xorg.conf file with the latest version of the backup configuration file:
sudo cp /etc/X11/xorg.conf.original-[version_number] /etc/X11/xorg.conf
Reboot your system. Your system should start up using the open source driver that ships with your operating system.
If the initial installation of the driver was done using the operating system's package management software (for example, RPM or APT), use that package management software to remove the ATI proprietary Linux driver.
Uninstalling RPM Packages:
Make sure you are logged in with superuser privileges.
Run the command: rpm -e [RPM_package_name]
NOTE: Do not include the version or architecture component when running the command.
Once the ATI proprietary Linux driver has been uninstalled, you must restore the X.Org configuration (xorg.conf) file so that your system can revert to using the X.Org open source driver that ships with your operating system. Run the following command to locate the backup configuration files available on your system:
ls /etc/X11/xorg.conf.original-*
NOTE: If the xorg.conf is not restored, the open source driver may fail to start properly after the ATI proprietary Linux driver is uninstalled.
Run the following command to replace the current xorg.conf file with the latest version of the backup configuration file:
cp /etc/X11/xorg.conf.original-[version_number] /etc/X11/xorg.conf
Reboot your system. Your system should start up using the open source driver that ships with your operating system.
Uninstalling DPKG/Debian Packages
Make sure you are logged in with 'sudo' privileges.
Run the command:
sudo apt-get purge fglrx-kernel-source fglrx-modaliases xorg-driver-fglrx libamdxvba1 xorg-driver-fglrx-dev fglrx-amdcccle
NOTE: Do not include the version, architecture, or .deb file extention when running the command.
Once the ATI proprietary Linux driver has been uninstalled, you must restore the X.Org configuration (xorg.conf) file so that your system can revert to using the X.Org open source driver that ships with your operating system. Run the following command to locate the backup configuration files available on your system:
ls /etc/X11/xorg.conf.original-*
NOTE: If the xorg.conf is not restored, the open source driver may fail to start properly after the ATI proprietary Linux driver is uninstalled.
Run the following command to replace the current xorg.conf file with the latest version of the backup configuration file:
sudo cp /etc/X11/xorg.conf.original-[version_number] /etc/X11/xorg.conf
Reboot your system. Your system should start up using the open source driver that ships with your operating system.
Podporované operační systémy
Red Hat® Enterprise Linux 5
Platí pro
FirePro V4800
Pokyny k instalaci
Custom Instructions for fglrx64_6_9_0-8.701-1.dell.x86_64_2.tar.gz:
Installation Requirements:
Although open source graphics drivers offered with X.Org may also be used with your graphics card, it is recommended that the ATI proprietary Linux driver be installed and used instead because open source graphics drivers may limit the functionality and performance of your ATI graphics card.
Operating Systems Distributions Supported
The ATI proprietary Linux driver is supported by various Linux distributions. For a list of supported Linux distribution versions, please refer to the Catalyst Linux Edition release notes.
System Requirements
For the ATI proprietary Linux driver to install and work properly, install the following first:
Latest DKMS package version for your Linux distribution.
Kernel module build environment; Kernel source code includes either the Kernel Source or Kernel Headers packages.
--------------------------------------------------------------------------------
Installing the Driver:
The ATI proprietary Linux driver consists of either a single RPM package or several DPKG/Debian packages, depending on the Linux distributions.
NOTE: To ensure a successful installation, uninstall any previous ATI proprietary Linux driver versions and/or third-party graphics drivers currently on your system before installing the new driver.
Installing RPM Packages:
Make sure you are logged in with superuser privileges.
cd to the directory containing the ATI proprietary Linux driver.
Run the command:
rpm -Uh [RPM_package_name]-[version].[architecture].rpm
Reboot your system.
Installing DPKG/Debian Packages:
Make sure you are logged in with 'sudo' privileges.
cd to the directory containing the ATI proprietary Linux driver Debian (*.deb) packages.
Run the following command to simultaneously install all *.deb packages:
sudo dpkg -i *.deb
or run the following command by explicitly naming each *.deb package:
sudo dpkg -i fglrx-kernel-source_[version]_[architecture].deb \
fglrx-modaliases_[version]_[architecture].deb \
xorg-driver-fglrx_[version]_[architecture].deb \
libamdxvba1_[version]_[architecture].deb \
xorg-driver-fglrx-dev_[version]_[architecture].deb \
fglrx-amdcccle_[version]_[architecture].deb
NOTE: "\" indicates a continuous line. The previous command should be typed as a single line without the backslashes, or across several lines including the backslashes as shown.
Reboot your system.
Reboot will be required
Installation Requirements:
Although open source graphics drivers offered with X.Org may also be used with your graphics card, it is recommended that the ATI proprietary Linux driver be installed and used instead because open source graphics drivers may limit the functionality and performance of your ATI graphics card.
Operating Systems Distributions Supported
The ATI proprietary Linux driver is supported by various Linux distributions. For a list of supported Linux distribution versions, please refer to the Catalyst Linux Edition release notes.
System Requirements
For the ATI proprietary Linux driver to install and work properly, install the following first:
Latest DKMS package version for your Linux distribution.
Kernel module build environment; Kernel source code includes either the Kernel Source or Kernel Headers packages.
--------------------------------------------------------------------------------
Installing the Driver:
The ATI proprietary Linux driver consists of either a single RPM package or several DPKG/Debian packages, depending on the Linux distributions.
NOTE: To ensure a successful installation, uninstall any previous ATI proprietary Linux driver versions and/or third-party graphics drivers currently on your system before installing the new driver.
Installing RPM Packages:
Make sure you are logged in with superuser privileges.
cd to the directory containing the ATI proprietary Linux driver.
Run the command:
rpm -Uh [RPM_package_name]-[version].[architecture].rpm
Reboot your system.
Installing DPKG/Debian Packages:
Make sure you are logged in with 'sudo' privileges.
cd to the directory containing the ATI proprietary Linux driver Debian (*.deb) packages.
Run the following command to simultaneously install all *.deb packages:
sudo dpkg -i *.deb
or run the following command by explicitly naming each *.deb package:
sudo dpkg -i fglrx-kernel-source_[version]_[architecture].deb \
fglrx-modaliases_[version]_[architecture].deb \
xorg-driver-fglrx_[version]_[architecture].deb \
libamdxvba1_[version]_[architecture].deb \
xorg-driver-fglrx-dev_[version]_[architecture].deb \
fglrx-amdcccle_[version]_[architecture].deb
NOTE: "\" indicates a continuous line. The previous command should be typed as a single line without the backslashes, or across several lines including the backslashes as shown.
Reboot your system.
Reboot will be required
Potřebujete pomoc s problémy s obrazem?
Vyhledejte řešení v příručce Dell k odstraňování problémů s obrazemNápověda a instruktáž k ovladačům
Další soubory ke stažení naleznete na adrese Ovladače a soubory ke stažení. Nápovědu k informacím uvedeným na této stránce naleznete na webu Nápověda a instruktáž k ovladačům.