Toshiba B70C for model number(s) KRM5XRUG960G, KRM5XRUG1T92, KRM5XRUG3T84, KRM5XRUG7T68, KRM5XVUG960G, KRM5XVUG1T92, KRM5XVUG3T84.
Installeret Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
This release contains firmware version Toshiba B70C for model number(s)KRM5XRUG960G, KRM5XRUG1T92, KRM5XRUG3T84, KRM5XRUG7T68, KRM5XVUG960G, KRM5XVUG1T92, KRM5XVUG3T84.
Anbefalet
Tjek kompatibilitet
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemIndtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Fixes:
Mitigates the likelihood of an incorrect SMART warning (and reduced write performance) related to the functionality of the drive's Power Loss Protection circuitry.
Læs mereMitigates the likelihood of an incorrect SMART warning (and reduced write performance) related to the functionality of the drive's Power Loss Protection circuitry.
Version
B70C, A00
Udgivelsesdato
14 sep. 2021
Downloadtype
Firmware
Kategori
SAS-drev
Vigtighed
VigtigtDell Technologies anbefaler på det kraftigste, at denne opdatering installeres så hurtigt som muligt. Opdateringen indeholder vigtige fejlrettelser og ændringer med henblik på at forbedre dit Dell-systems funktionalitet, pålidelighed og stabilitet. Den kan også omfatte sikkerhedsrettelser og andre funktionsforbedringer.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Opdateringspakke til MS Windows 64-bit.
Filnavn: SAS-Drive_Firmware_12D7W_WN64_B70C_A00.EXE
Filstørrelse: 10.28 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages i Microsoft Windows 64-bit standardformat kræver ikke, at Microsoft WOW64 skal være installeret på Microsoft Windows Server.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
6ddb5f10cd6e64729b880f3844eb7647
SHA1:
34fe97c1e2339856f3a614ee3a91334168202741
SHA-256:
b26e62c7f80f8109b6ff501398ced819a82588ca52b70cd2856dbad03ef9e45d
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: SAS-Drive_Firmware_12D7W_LN64_B70C_A00.BIN.sign
Filstørrelse: 226 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
248a534dcd62e4d42575baa361476c6b
SHA1:
647020c471781e512357fe6c9e5e50c8e2c63969
SHA-256:
25768c39e2f64c4b1c2e222596cb8a291ace5411ef26552b31b99765846f3eba
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: SAS-Drive_Firmware_12D7W_LN64_B70C_A00.BIN
Filstørrelse: 3.43 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
4afee0790867a790d19dfdb7ce0a6c68
SHA1:
8dc168f88e8f8a570068f3945ea38b778c6d7a87
SHA-256:
0b0263ab428010014e8fb5af5d8d95461e3b2c867a18827c21733d12254ebe86
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Vigtige oplysninger
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Understøttede operativsystemer
Novell SuSE Linux ES 11
Windows Server 2008 x64
Suse Linux ES 10
Linux
Windows Server 2012
Ikke relevant
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Enterprise Linux 5
Red Hat® Enterprise Linux 8
Windows Storage Server 2012 R2
Novell SuSE Linux ES 10
SuSE Linux Desktop 11
SUSE Linux ES 12
SuSE Linux ES 15
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2003
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2008 R2
Windows Storage Server 2012
Windows Server 2016
Windows Server 2003 x64
Gælder for
Toshiba Raven-M5 MU 1.92TB 12Gbps SAS 2.5 512e ISE
Model Number: KRM5XVUG1T92
Regulatory Model Number: KRM5XVUG1T92
Vendor PN: SDFGD85DAB01
Toshiba Raven-M5 MU 3.84TB 12Gbps SAS 2.5 512e ISE
Model Number: KRM5XVUG3T84
Regulatory Model Number: KRM5XVUG3T84
Vendor PN: SDFGD84DAB01
Toshiba Raven-M5 MU 960GB 12Gbps SAS 2.5 512e ISE
Model Number: KRM5XVUG960G
Regulatory Model Number: KRM5XVUG960G
Vendor PN: SDFGD86DAB01
Toshiba Raven-M5 RI 1.92TB 12Gbps SAS 2.5 512e ISE
Model Number: KRM5XRUG1T92
Regulatory Model Number: KRM5XRUG1T92
Vendor PN: SDFGE85DAB01
Toshiba Raven-M5 RI 3.84TB 12Gbps SAS 2.5 512e ISE
Model Number: KRM5XRUG3T84
Regulatory Model Number: KRM5XRUG3T84
Vendor PN: SDFGE84DAB01
Toshiba Raven-M5 RI 7.68TB 12Gbps SAS 2.5 512e ISE
Model Number: KRM5XRUG7T68
Regulatory Model Number: KRM5XRUG7T68
Vendor PN: SDFGE83DAB01
Toshiba Raven-M5 RI 960GB 12Gbps SAS 2.5 512e ISE
Model Number: KRM5XRUG960G
Regulatory Model Number: KRM5XRUG960G
Vendor PN: SDFGE86DAB01
Installationsvejledning
Dell Update Package instructions for Windows Dup:
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware__LN__A00.BIN " from the shell.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware__LN__A00.BIN.Sign.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware_
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware_
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.