WDC Paris-C SAS ISE US05 for model numbers WUH721816AL5200, WUH721818AL5200.
Installeret Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Initial release of WDC Paris-C SAS ISE UT05 firmware. Model numbers WUH721816AL5200, WUH721818AL5200.
Anbefalet
Tjek kompatibilitet
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemIndtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Fixes:
-Initial release
Enhancements:
-Initial release
Læs mere-Initial release
Enhancements:
-Initial release
Version
US05, A00
Udgivelsesdato
09 dec. 2020
Downloadtype
Firmware
Kategori
SAS-drev
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Opdateringspakke til MS Windows 64-bit.
Filnavn: SAS-Drive_Firmware_283J7_WN64_US05_A00.EXE
Filstørrelse: 11.77 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages i Microsoft Windows 64-bit standardformat kræver ikke, at Microsoft WOW64 skal være installeret på Microsoft Windows Server.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
8a37533c0d5dd39867c302b15dd80fdd
SHA1:
7cb1167df8c8bee886d5e200a539d8c09718cfc5
SHA-256:
99da8ab2998750c02c1a847b5148404b074199750d576ded8dbd992244a19e25
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: SAS-Drive_Firmware_283J7_LN_US05_A00.BIN.sign
Filstørrelse: 226 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
5b13c1213ede263a130db01c95b5cab1
SHA1:
987b66939026a5cfcbcada840cddb3498b18849d
SHA-256:
9d74001a75b6f074aba4e42dd3e071eed45f0420e03f1386e5b0e9a8d1676181
Filformat: Opdateringspakke til MS Windows 32-bit.
Filnavn: SAS-Drive_Firmware_283J7_WN32_US05_A00.EXE
Filstørrelse: 10.56 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages (DUP) i Microsoft Windows 32-bit-format er udviklet til at køre på Microsoft Windows 64-bit-operativsystemer. Dell Update Packages (DUP) i Microsoft Windows 64-bit-format kan kun køre på Microsoft Windows 64-bit-operativsystemer. Når du vælger en driveropdatering, skal du sørge for at vælge den udgave, der passer til dit operativsystem.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
cfc80ac81cdab422a1eef15910b02b32
SHA1:
0a6eb00a5a7a45fda88a2033020c0c37dc706e0f
SHA-256:
8d1d47e1264de2257e798588052fe2a210a26b9e37f8ab97787f15f14c9ba3ea
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: SAS-Drive_Firmware_283J7_LN_US05_A00.BIN
Filstørrelse: 7.44 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
3572c30702f9029ebfffd20a2ae2ef25
SHA1:
9047b671fabd29af5c45a090976e9906e65f3b6c
SHA-256:
7dd77d80308ff3c945d6a50a1b5dd00ec31b315f152a4bcc54c8ae214e45017e
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Vigtige oplysninger
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Understøttede operativsystemer
Novell SuSE Linux ES 11
Windows Server 2008 x64
Suse Linux ES 10
Red Hat® Linux 6.1
Red Hat® Linux 6.2
Red Hat® Linux 7.0
Red Hat® Linux 7.1
Red Hat® Linux 7.2
Red Hat® Linux 7.3
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Windows Server 2012
Ikke relevant
Red Hat® Enterprise Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Enterprise Linux 5
Red Hat® Enterprise Linux 8
Windows Storage Server 2012 R2
SUSE Linux ES 12
SuSE Linux ES 15
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2008 R2
Windows Storage Server 2012
Windows Server 2016
Gælder for
HD,16.T,722E,IS12,3.5,W,PC,EC
Model Number: WUH721816AL5200
Regulatory Model Number: US7SSR160
Vendor PN: 0F38375
HD,18.T,722E,IS12,3.5,W,PC,EC
Model Number: WUH721818AL5200
Regulatory Model Number: US7SSR180
Vendor PN: 0F38377
Installationsvejledning
Dell Update Package instructions for Windows Dup:
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware__LN__A00.BIN " from the shell.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware__LN__A00.BIN.sign.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware_
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware_
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.